Hey guys,
I think i messed up. I have a 2014 1500 bighorn rwd 8spd. Long story short I banged into a pole in a parking lot and sheared my headlight off and banged up the fender/bumper. in the process of doing so, the little female metal pins pulled out of the plastic connector on the body side wiring harness for the headlight. (not the turn signal, i hope that makes sense)
So, today was the day i put it all back together. When it came time to install the headlights i had to figure out what order the pins/wires go into the plastic connector for the headlight (not the turn signal). Since it was kind of trial and error I left the battery connected (I know, dumb). Once I finally got it right I was happy for about 2.5 seconds, until I realized the radio and dash LCD displays are dead, and the truck won't start-wont even click. The strange things are that now, after having the keys in the run position for about 5 seconds, the wipers come on even when switched off, I also have all dash lights and my shifter indicator lights up in P, and lastly- the horn won't work.
So as of now i pulled both headlights back out and disconnected the negative terminal on the battery... Im really hoping I didn't fry the computer or something. I should also mention that I have retroshop 13+ projector harnesses/projectors installed (no HID). I hope I gave enough info here...
Has anybody ever seen something like this???
I think i messed up. I have a 2014 1500 bighorn rwd 8spd. Long story short I banged into a pole in a parking lot and sheared my headlight off and banged up the fender/bumper. in the process of doing so, the little female metal pins pulled out of the plastic connector on the body side wiring harness for the headlight. (not the turn signal, i hope that makes sense)
So, today was the day i put it all back together. When it came time to install the headlights i had to figure out what order the pins/wires go into the plastic connector for the headlight (not the turn signal). Since it was kind of trial and error I left the battery connected (I know, dumb). Once I finally got it right I was happy for about 2.5 seconds, until I realized the radio and dash LCD displays are dead, and the truck won't start-wont even click. The strange things are that now, after having the keys in the run position for about 5 seconds, the wipers come on even when switched off, I also have all dash lights and my shifter indicator lights up in P, and lastly- the horn won't work.
So as of now i pulled both headlights back out and disconnected the negative terminal on the battery... Im really hoping I didn't fry the computer or something. I should also mention that I have retroshop 13+ projector harnesses/projectors installed (no HID). I hope I gave enough info here...
Has anybody ever seen something like this???