Yes my camera wiring is the same as Post 26. I had the wear out extension cable back by the tailgate. I pulled the 2 tailgate lock wires out of that and installed them in the Kits body harness and verified that the lock worked. I worked form the rear to the front of the truck step by step. Where my trouble started was when I removed the pins 1-3 connections and hooked up the camera wire in those & turned on the system. I got nothing, so I realized at that point I had probably miss read the diagram in the instructions as others had. I then put the pin 1-3 wires back into their correct spots and hooked up the camera wires in 31-33. Turned on the system and get the "Uconnect" screen with no functionality whatsoever.