My lightbar....

[Tom88]

The L brackets are 3" but I kind of wished I got the 4" since they a little bit thinker


Sent from my iPhone using Tapatalk

Ok thanks Bud.


Sent from my iPhone using Tapatalk

 

[sking2001]

43" Curved LED... boom

Custom install

 

[Curlyp]

Custom install

Looks nice! Which light bar do you have?


Sent from my iPhone using Tapatalk

 

[sking2001]

Random $50 lightbar on amazon... I didn't want to spend much on a light bar mounted that low if you catch my drift... I didn't go in with much expectations and I have to say it works fantastic for night off roading... So far no issues going on 6 months.... Also easier install than you think. Check this thread for my tips and tricks i used. http://www.ramforum.com/f41/install...4_sport_bumper-52690/index27.html#post1429852

 

[olie03]

Here's mine



Sent from my iPhone using Tapatalk

I'm looking at doing same thing as you, but it looks like my license plate hangs down infront of it a bit? mines a 2015 as well, did you have to modify it at all?

 

[15RamTX]

I'm looking at doing same thing as you, but it looks like my license plate hangs down infront of it a bit? mines a 2015 as well, did you have to modify it at all?

My plate had the plastic holder on it I just took that off and it fit fine

Sent from my LG-H918 using Tapatalk

 

[olie03]

Here's my 42" light bar and led pods

Sent from my SAMSUNG-SM-N910A using Tapatalk

can you show a shot with light bar at night? thats exactly what Im thinking of doing. does the license plate get in the way?

 

[Curlyp]

For those that have a 42" 560watt light bar, what wiring kit did you use? I cannot find one that supports a 560watt led light bar.


Sent from my iPhone using Tapatalk

 

[sking2001]

I believe my 43" curved came with an array module and wiring harness so it wouldn't drain the battery. I don't have a night shot but I took this while installing it... I do not have a license plate holder on the front... My state doesn't require a license plate on the front, helmets, or beer goggles... Nothing finer than South Carolina woot woot

 

[Bo Daggart]

Same bumper as mine and I have a 42" curved lightbar

 

[Curlyp]

For those that have a 42" 560watt light bar, what wiring kit did you use? I cannot find one that supports a 560watt led light bar.


Sent from my iPhone using Tapatalk

Thank you.

I bought a heavy duty 12 gauge 600W LED wiring harness with 60 amp relay. The light bar I bought was 560WATT.










Sent from my iPhone using Tapatalk

 

[Rzrman328]

I used the two lower bolts that held the flipper vents and homedepot L bracket
TRIPLE-ROW LED Light Bar, POWLAB 28


Sent from my iPhone using Tapatalk

Do you have any night output shots?

 

[Oscar]

Do you have any night output shots?

No but I'll try to get some tonight


Sent from my iPhone using Tapatalk

 

[JB007Rules]

Does anyone have any ideas for which brackets I could use for my 2012 RAM 1500 Big Horn Quad Cab? Thinking 50 or 52" curved up on the roof!

Could I be so fortunate to get no-drill brackets? Thoughts?

 

[Oscar]

Do you have any night output shots?

first picture is headlight on next headlight and led bar and last picture Led bar only, I have 2 led bar they both turn on at the same time



Sent from my iPhone using Tapatalk

 

[Oscar]

first picture is headlight on next headlight and led bar and last picture Led bar only, I have 2 led bar they both turn on at the same time



Sent from my iPhone using Tapatalk

the 22" bar is on my bull bar and the 28 is behind the grill, The 22" did just fine but I felt like adding extra one just cause.



Sent from my iPhone using Tapatalk

 

[rgenereux420]

wicked light bars

 

[rgenereux420]

Led grille

Do you have any night output shots?

i need some help with wiring, i have projector headlights and i want to run three led lights off the daytime running lights and i want to make sure that it wont mess up anything. im placing the leds in the bottom grille and wanted to run them off the daytime lights so they are always on.

 

[Dierks the Dodge]

Has anyone tried those light bar mounts that have 2 powerful magnets on each mount? I saw them the other day and thought it was pretty cool.

Magnetic light bar mount

 

[Rzrman328]

i need some help with wiring, i have projector headlights and i want to run three led lights off the daytime running lights and i want to make sure that it wont mess up anything. im placing the leds in the bottom grille and wanted to run them off the daytime lights so they are always on.

Do you have pics of these LED lights?