What did you do with your 4th Gen this week?

[usaf2006]

I see that all the time when rookies do fender rolling. Ya gotta warm the paint up with a heat gun, not a ton, but enough that you can't hold your hand on the panel. It lets the paint flex back.

Well it was pretty warm from sitting in the Georgia sun all day... I'm thinking the paint was cracked or something that wasn't visible due to the crease. Oh well... It's a minivan lol

 

[JayMac]

This weekend it was cleanup time:

Washed, Clayed, Glazed, and Sealed

Sent from my iPhone using Tapatalk

 

[Ramm5.7]

This week was Vanquish LED low beam lamps!! Great output and quality product, imo

 

[cityboy21]

Added Sport upholstery to my Big Horn seats. Big improvement over the stock cloth. Looks fantastic.

 

[RAM DRVR]

Added Sport upholstery to my Big Horn seats. Big improvement over the stock cloth. Looks fantastic.

Pictures or it didn't happen...…..

 

[jmh288]

Tried re-installing the BakBox in the truck, where I need it to be. Then tried another phone call to Bak only to end up pissed off. http://www.ramforum.com/threads/poor-quality-sized-wrong-and-poor-service-from-bakindustries.121386/

They totally suck to talk to.


Sent from my iX using my iThumbs via Tapatalk

 

[fire101fighter]

They totally suck to talk to.


Sent from my iX using my iThumbs via Tapatalk

Totally agree! I had 4 separate covers from them. All had issues with the seals between the panels leaking real bad, rivets popping out of the supports, and horrible customer service. Finally get a full refund and went with the cheap truxedo truxport roll up. So much happier!


Sent from my iPhone using Tapatalk

 

[BTD07]

Well, as per the BFG representative’s advice, I aired my KO2’s up this morning to 55 psi as instructed from the 39 psi that the door sticker recommends for the stock SRA’s. It does ride a little bit more solid but feels like it might be a little bit smoother. My braking is more solid. Cornering seems to be better and even acceleration is better.

I dunno, I guess I just never thought that more air pressure in an almost double ply-rated tire made sense. Lol.



Sent from my iPhone using Tapatalk Pro

I knew I wasnt off lol. However I aired mine down to around 52 so that when the heat expands they get to about 56 vs 60.

 

[corneileous]

I knew I wasnt off lol. However I aired mine down to around 52 so that when the heat expands they get to about 56 vs 60.

Yeah I think I’m gonna continue at least for a little bit at giving mine a whirl at 55 psi but I’m thinking it won’t be long at all until I’ll be airing mine back down a little bit to at least 50 psi. The BFG guy said that would be safe to do if it turned out that not all my back tire’s tread wasn’t making contact with the road at that pressure. They are, but I think 50’s fine...lol


Sent from my iPhone using Tapatalk Pro

 

[tones2SS]

Gave the white beast a wash yesterday. Looks killer.
Just waiting on the CarPro Iron-X to get rid of all those iron deposits.

 

[Danny Roberts]

Or switch dealers! I know, I know, easier said than done in some parts of the country!

TXCOMT

Milton Ruben sucks!

 

[MarshRam]

Created 12 hours of mayhem and probably 20 hours of cleaning and detailing!

http://www.ramforum.com/threads/not-getting-out-of-this-one.121388/

 

[cityboy21]

Pictures or it didn't happen...…..

Ordered and installed black headrest guides for the front seats as seen in the pics. The gray didn't look right. Left the gray on the rears as you don't see them.

 

[BTD07]

Gave her a bath inside and out

 

[dav8388]

Took it to the dealer to fix a leaky valve stem. I noticed the first week after I bought it I had a slow leak in the right rear. I finally got time to check it out, and found out it is leaking where the stem goes into the rim. dealer is covering it under the warranty

 

[Gero]

I just installed a dashcam (aukey dr02 1080p) in the ram. Hardwired it to the overhead using the homelink 12v feed. Works well!

 

[dav8388]

Took it to the dealer to fix a leaky valve stem. I noticed the first week after I bought it I had a slow leak in the right rear. I finally got time to check it out, and found out it is leaking where the stem goes into the rim. dealer is covering it under the warranty

Just got the truck back and they did this to my wheel. I realize is not much but I am extremely **** about my cars no matter if it is my 87 Camaro or the Saturn I sold for the truck. They said they will take care of it but with my work schedule it might be a while before I can get over there again.

 

[usaf2006]

Created 12 hours of mayhem and probably 20 hours of cleaning and detailing!

http://www.ramforum.com/threads/not-getting-out-of-this-one.121388/

Who paid to unstuck the rescue truck

 

[Pull Ya]

Just got the truck back and they did this to my wheel. I realize is not much but I am extremely **** about my cars no matter if it is my 87 Camaro or the Saturn I sold for the truck. They said they will take care of it but with my work schedule it might be a while before I can get over there again.

View attachment 130664

I'd have plenty of pictures just so they don't forget----
Jay

 

[MarshRam]

Created 12 hours of mayhem and probably 20 hours of cleaning and detailing!

http://www.ramforum.com/threads/not-getting-out-of-this-one.121388/

View attachment 130646
View attachment 130648
View attachment 130649
View attachment 130650
View attachment 130651

I paid to get both rescue trucks out but did not pay for the rescue truck that rescued me.