Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are you going to put some padding and carpet on the mdf?
Yup, dogs have it better than I do haha. Both pieces together measure 60x39. These foam beds measure 40x30. so a perfect fit.
View media item 27364
Still have about 4-5" under the boards for some quick access storage. Can kinda see it under the moving blanket.
View media item 27360
Installed BumperShellz to my rear bumper... Not too happy with the outcome, partly due to the weather. They say the 3M tape works best above 70*, well it was exactly 70* when I put it on. It also says not to get wet for 24 hours after install, well I drove home in the rain. None of my tape stuck. Every panel is loose... The thing im most upset about are the holes are not exactly lined up for the parking sensors, and its not a true color match even though the paint codes match. PW7 is supposed to be Bright White, but my bumper is noticeably 'Whiter' than my truck.
This weekend im going to pull every panel back off and Silicone the **** out of it and re-install. I didnt take any pictures yet because its been pouring rain all weekend.
For $250 im not too excited with what I received.
What year is your truck? Paint fade can play apart in the color not matching
I love my truck!
Blue Mule 18 Ram 4x4 C/C
Tradesman Power Wagon
Installed BumperShellz to my rear bumper... Not too happy with the outcome, partly due to the weather. They say the 3M tape works best above 70*, well it was exactly 70* when I put it on. It also says not to get wet for 24 hours after install, well I drove home in the rain. None of my tape stuck. Every panel is loose... The thing im most upset about are the holes are not exactly lined up for the parking sensors, and its not a true color match even though the paint codes match. PW7 is supposed to be Bright White, but my bumper is noticeably 'Whiter' than my truck.
This weekend im going to pull every panel back off and Silicone the **** out of it and re-install. I didnt take any pictures yet because its been pouring rain all weekend.
For $250 im not too excited with what I received, not because of the tape but because of the color mis-match and the misaligned parking sensor holes.
Man!!.....sorry to hear that......probably could of had it wraped for $250.00
Yup, dogs have it better than I do haha. Both pieces together measure 60x39. These foam beds measure 40x30. so a perfect fit.
View media item 27364
Still have about 4-5" under the boards for some quick access storage. Can kinda see it under the moving blanket.
View media item 27360
tinted my windows to 18%, ordered Power Stop Z36 kit for front and back brakes as well as Pro Comp upper control arms, changed the oil to Royal Purple 5W20, installed the Vararam Air Grabber, and changed the spark plugs to E3 spark plugs. Debating on ordering a Road Armor, Warn, or Iron Cross front bumper so that I can eventually add a 12,000lb winch as well as protect my front end from the other geniuses on the road. lol
You were busy!! Let us know how those spark plugs work out. Most people that don't use the standard cooper plugs don't have very good luck when they change to something else.
Jay
Yeah, I know the tape not sticking is my fault, but the holes not lining up and the paint not matching is NOT my fault. It just looks super cheesy on my bumper.... In the end, I got exactly what I paid for... A bumper 'cover'.
Ill take pictures of everything once the weather is better and I reinstall with Silicone.
Think about using fast set window urethane and scuff the contact area of plastic " cover " for best adhesion.
When ever using dbl sided tape . The 3M adhesion promoter should be used for optimal performance. It's like putting down super glue for the tape to stick to.