cory733
Member
- Joined
- Aug 18, 2018
- Posts
- 42
- Reaction score
- 14
- Location
- New York
- Ram Year
- 2015 Big Horn Quad Cab
- Engine
- Hemi 5.7
I'm adding some ambient footwell lights to my 2015 Bighorn Quad Cab.
I can run a wire through the firewall into the trailer parking light fuse or something but would rather just tap into something in the interior.
I know this circuit is everywhere, these wires power the little LEDs that light up the switches and stuff.
Anyone know an easy spot to do this? If not I might just pick a harness, unplug it and start testing for power with the lights on.
I tried finding a .pdf for the mopar ambient light kit to see where that plugs into, but I think it just connects behind the 12V outlet and uses a switch, so not really what I'm looking for.
I'll have wires going to both front footwell areas and probably under each front seat also.
Thanks
I can run a wire through the firewall into the trailer parking light fuse or something but would rather just tap into something in the interior.
I know this circuit is everywhere, these wires power the little LEDs that light up the switches and stuff.
Anyone know an easy spot to do this? If not I might just pick a harness, unplug it and start testing for power with the lights on.
I tried finding a .pdf for the mopar ambient light kit to see where that plugs into, but I think it just connects behind the 12V outlet and uses a switch, so not really what I'm looking for.
I'll have wires going to both front footwell areas and probably under each front seat also.
Thanks