Bennutts
Member
- Joined
- Oct 2, 2015
- Posts
- 81
- Reaction score
- 15
- Ram Year
- 2015
- Engine
- Cummins 6.7
So here's my dilemma, I found a smoking deal on a set of 35x12.5x18 Goodyear Duratracs. Previous owner said they had less than 10k miles on them. Snatched them up took them to my local tire shop who has always done good work and had them mounted. When they called to tell me the truck was done they asked if I knew the tires were a D load range and the tires I had taken off were E load range. I did not. That being said the max psi on the Duratracs being a load range D and a 35x12.5 tire 65psi. I told them that was fine and I would just deal with the low tire pressure warning later. After about a week, of driving I'm very disappointed. I have a bad vibration between 50-70mph and the truck doesn't feel like it handles as well. I'm seriously considering taking these off and buying a set of Cooper ST Maxx tires in a 295/70/18 which are a 3 ply sidewall or Mastercraft Courser CXT which are a 2 ply sidewall in the same size. Any thoughts or suggestions before I go dropping another $1200 or more on tires?
The previous tires were Kelly Edge A/T's which I did like but wanted something that would fill out the wheel well a little more since I put the Bilstein leveling coils and shocks on the truck.
The previous tires were Kelly Edge A/T's which I did like but wanted something that would fill out the wheel well a little more since I put the Bilstein leveling coils and shocks on the truck.