What did you do with your 4th Gen this week?

[shadowhawk]

Haven’t done anything new with it other than keepin it clean and admiring it lol
View attachment 220990

keeping it clean is enough of a chore. Man there's a lot of surface area on these trucks!!

 

[Nick14]

Installed Pioneer 6x9's front & rear. Nick

 

[blackbeautyhemi]

keeping it clean is enough of a chore. Man there's a lot of surface area on these trucks!!

Lol yea you got that right!


Sent from my iPhone using Tapatalk

 

[tones2SS]

We live right on the 90/80% line
View attachment 220954
freezing rain mostly, lost power about 5 times (1hr to 5 min)
View attachment 220983

WOW!!!!
Still waaaaaayyy too early for that crap! lol

 

[Adamcr68]

I plan on doing that as well When i get time. Did you just snap the clips off?

I used a small pair of needle nose pliers to wedge up on both sides under the top but the whole piece is snapped in to the above trim. I did the 4 bolts first, leaving the 2 outside loose so the back wouldn’t fall stressing the clips, removed the press in clips with the pliers but was still firmly attached every other connection between the press in tacks slides in & clicks had to use a small chisel to release each one from the inside started on one side and gently pushed as I worked across to the other side. I was by myself so used a small box to hold the end I started on, still shocked none of the clips broke!

 

[BadHemi2014]

Sorry but I gotta show off a little, kinda proud of myself!
Parking brakes done!
Old and nasty:

New and shiny:

And got my new calipers on. Painted them first with G2 caliper paint. Really like it so far. I'm sure these will be a pain to keep clean lol.



And another shot of the tow hooks I added. Painted then with the G2 caliper paint as well, I'll see how well it holds up.


I did not remove the axle to do the parking brakes. It was a bit of a pain, but definitely doable. A long nose locking plier is a necessity. And patience lol.

 

[Addicted2fishing]

Got my new to me heavy duty springs installed in the rear. Gave an inch of lift (was hoping for 2”) but so far with drywall and plywood it’s barely squatted. The springs are almost twice the thickness as stock springs. Those stock springs are a joke IMO


Sent from my iPhone using Tapatalk

 

[Pull Ya]

Got my new to me heavy duty springs installed in the rear. Gave an inch of lift (was hoping for 2”) but so far with drywall and plywood it’s barely squatted. The springs are almost twice the thickness as stock springs. Those stock springs are a joke IMO


Sent from my iPhone using Tapatalk

Put all them fish you catch in the back and see if it squats any, that will be the true test----LOL
Jay

 

[Addicted2fishing]

Put all them fish you catch in the back and see if it squats any, that will be the true test----LOL
Jay

*****. And get arrested by the fish police ? No thanks! Those guys have more power than police do!!


Sent from my iPhone using Tapatalk

 

[4eyedconekiller]

Took Phatty to get the lower balljoints installed, fresh alignment, and a tire repaired... Might be just me, but the steering is definitely tighter and more direct. Got some questions about what’s next, but I’ll put those in my build thread and/or suspension section.

 

[fprevos]

Latest version of my Warlock dash badge. I really like this this one, so it should be the last version.
View attachment 220987

Where did you get it at?

 

[W4RL0CK]

Where did you get it at?

From Nate at Rebadge Design. You can email him.

 

[fprevos]

Definitely doing that for mine, Thanks.

 

[W4RL0CK]

Definitely doing that for mine, Thanks.

Cool! The badge has a ton of detail... that pic doesn’t do it justice.

 

[OnSale]

Installed Pioneer 6x9's front & rear. Nick

Which pioneers and where did you get them from?


Sent from my iPhone using Tapatalk

 

[blackbeautyhemi]

Used it to haul 27 blocks, 3 caps, and 3 bags of mortar. Adds up to just under 1300lbs in the bed. Handled it very well which is good cause I didn’t add up the weight til I got home from Lowe’s lol

 

[haasri]

hey BlackBeauty what brand is your 3rd brake light? Nice

 

[Tim7139]

Paid for it and drove it home - old meets new

 

[co-pilot]

Paid for it and drove it home - old meets new

View attachment 221161

WoW!......very nice!

 

[OnSale]

So I picked up my front bumper yesterday from getting painted and it was pouring rain so I quickly wrapped it in plastic and strapped it into the bed of my truck and last night I got to look at it and the paint is HORRIBLE! There’s clear coat missing in half the bottom lip, there is huge pinhead marks all over from dust and dirt being trapped underneath, it’s seriously ****** up. So now I have to bring it back and ***** and complain until they fix it properly.

I ordered these led lights on eBay to replace the amber ones on my grille


Will be replacing these


Bought this from [mention]Dcheatham [/mention]




Still waiting on my Phoenix Automotive 12.1” Tesla Style screen. I ordered it 36 days ago and it still hasn’t shipped. This company is complete **** and is the worst company I’ve ever witnessed. It’s a **** show, customer service is a joke and will get mad at you and give you attitude and be extremely rude. It’s literally been 36 days since I placed my order and still yesterday nobody could give me a straight answer as to when my radio will ship. It’s complete f’n bulls**t man.... nobody should ever buy from this company ever.


Sent from my iPhone using Tapatalk