WTB: exhaust tips 5”

[Solid State]

Not trying to hijack the OPs thread, but am I the only one that likes the rolled tips that Moe's used to offer? ALL of the 5" tips on the market are the straight cut type. I guess I prefer the factory look of the rolled edges. Wish Moes would bring theres back....

 

[noodles]

I bought my Carven tips from Moe's.

 

[Solid State]

I bought my Carven tips from Moe's.

Yes, but they are Carven brand. Moe's used to sell their own 5" tips that had rolled edges just like the factory tips do. I've never gotten an answer on here as to why they discontinued them.

 

[Badger 13]

Your not the only one, I prefer the look of the "rolled" tips as well. Wished Moe's still offered them.

 

[1SloRam]

Same, factory look is my preference. Never found a set of 5” tips I liked and the “sellers” haven’t responded to PM’s. So beware of anyone selling some in this post that isn’t a vendor.

 

[El_Lobo_Gris1500C]

We just released some 5" tips - Pricing is in Canadian - They are 2 1/4" to 5" bolt on
https://www.mandrelbending.ca/colle...lassic-ram-1500-t304-5-stainless-exhaust-tips

Can I order a set of stainless 5” tips and pick up in person? What days/times are you available to Pick up at your location in person?

 

[LyellStainless]

Your website says the Black ones are sold out.

I have a few questions

1. How far do they stick out past the bumper?
2. Is the Powder coat Flat or Gloss finish?
3. Do you have any more pics?

We sold out over the weekend once we posted!
They are a flat finish!
We will have more tips posted the upcoming week; if you would like to give me your e-mail or if you follow our thread here in the sponsored section, I will post the minute the second batch hits the online store!

Thank you so much!!

 

[2016Bighorny]

Not trying to hijack the OPs thread, but am I the only one that likes the rolled tips that Moe's used to offer? ALL of the 5" tips on the market are the straight cut type. I guess I prefer the factory look of the rolled edges. Wish Moes would bring theres back....

Yup... I agree!!
I have the Mufflex 5" tips on my Ram. I bought them because they are ROLLED! I love them, they are top notch quality!!

 

[PartTimeHero]

We sold out over the weekend once we posted!
They are a flat finish!
We will have more tips posted the upcoming week; if you would like to give me your e-mail or if you follow our thread here in the sponsored section, I will post the minute the second batch hits the online store!

Thank you so much!!

Is gloss powder coat an option? I would much rather have that vs flat.

 

[El_Lobo_Gris1500C]

Here are a few photos of the Lyells Stainless 5” tips on my 2021 Classic. The tips are great, the factory clamps suck lol, had to clamp them down as tight as possible and then tack weld the clamp to the stock pipe and tip to secure 100%. Happy with the look except my factory muffler pipes were not installed properly and equally, so one new tip sticks out about 1/2” - 3/4” from the cutout and is (to me) noticeable. I will have to see if I can get that side muffler pipe to go into the muffler a little bit, to in turn pull in the tail pipes and tip and make even with the passenger side cutouts/bumper.

 

[LyellStainless]

Here are a few photos of the Lyells Stainless 5” tips on my 2021 Classic. The tips are great, the factory clamps suck lol, had to clamp them down as tight as possible and then tack weld the clamp to the stock pipe and tip to secure 100%. Happy with the look except my factory muffler pipes were not installed properly and equally, so one new tip sticks out about 1/2” - 3/4” from the cutout and is (to me) noticeable. I will have to see if I can get that side muffler pipe to go into the muffler a little bit, to in turn pull in the tail pipes and tip and make even with the passenger side cutouts/bumper.

View attachment 241749

View attachment 241750

View attachment 241751

Thank you so much! Looks awesome - We have clamps for sale on our website as well for the tips! Glad you were able to figure out a solution though.
Cheers!

 

[Rick_Hunts]

started looking today and yes, would prefer rolled edges

 

[Tray Burge]

These are double walled with rolled edges and like $60 bucks for the pair, but they come in black too.

 

[1SloRam]

I kept looking for the Jeep’s exhaust. Nice side pipes, lightening style.

 

[MikeSumthin]

I kept looking for the Jeep’s exhaust. Nice side pipes, lightening style.

Haha, same here.
I've been hunting for a nice set of 5", even 6" tips for under $200...

...May the odds be ever in my favor.

Sent from my SM-G988U1 using Tapatalk

 

[Tray Burge]

Haha, same here.
I've been hunting for a nice set of 5", even 6" tips for under $200...

...May the odds be ever in my favor.

Sent from my SM-G988U1 using Tapatalk

These probably (maybe?) aren't as nice as OEM Ram tips, but they are pretty beefy being double side walled and stainless. From Auto Zone, but now they carry them in black powdered coat.
The Jeep, haha, she has a completely new exhaust system from manifold back since that was taken, but she's a measly 4 banger so nothing special there. lol

 

[1SloRam]

Haha, same here.
I've been hunting for a nice set of 5", even 6" tips for under $200...

...May the odds be ever in my favor.

Sent from my SM-G988U1 using Tapatalk

Same here my guy, best of luck.

 

[NJMOPAR]

Same here my guy, best of luck.

I replaced my 5" tips (3in/5out) with 6" ones from the same company LCGP Performance on Amazon. They're 4in/6out, polished stainless w/2 yr warranty. $27 each, plus the adapters to go from 2 1/4 to 4".
View media item 30753

 

[1SloRam]

I replaced my 5" tips (3in/5out) with 6" ones from the same company LCGP Performance on Amazon. They're 4in/6out, polished stainless w/2 yr warranty. $27 each, plus the adapters to go from 2 1/4 to 4".
View media item 30753

Beefy!