Recent content by jonathanhudaon
-
66rfe Swap Info
Ok I’ll have to look into it all from the research I’ve done hp does support the 65 and 66rfe and also from everything I know. I could be wrong though the 65rfe doesn’t have a tcm. Everything is controlled directly through the pcm- jonathanhudaon
- Post #24
- Forum: 4th Gen DIY
-
66rfe Swap Info
Lol I’ve been abusing the t now for 135,000 km. Things been lifted since it had 25,000 km. Yeah I was looking at adding their billet pump half to my build and a few other things. Seen the co pilot but didn’t know if it was worth the money. As I have hp tuners now. Is it worth the money I wonder...- jonathanhudaon
- Post #22
- Forum: 4th Gen DIY
-
66rfe Swap Info
Lol I am very opinionated and like you said it’s my truck and my money. Yeah and with the money you have to pay for those transmissions. I could pay for three 68 rfea fully outfitted with every billet part there is. No thanks but you are entitled to your opinion too. I’m just sick of seeing...- jonathanhudaon
- Post #21
- Forum: 4th Gen DIY
-
66rfe Swap Info
he had 3.92 with 35’s and a 6” lift. So that’s fine for it. Thanks. Like I said I’m not interested in a 8 speed. I’ll just do all the upgrades on my 65 first. I’ll never put a 8 in my truck. If I wanted an 8 speed. I would have bought an 8 speed truck. The 8 speed to me is garbage and I’ll never...- jonathanhudaon
- Post #18
- Forum: 4th Gen DIY
-
66rfe Swap Info
Read this thread mutiple times. Doesn’t have the info I’m looking for plus guys saying 8 speed swap it but I thought he had went a different route but if he is still working in it I will reach out to him. I’d have it done if Charles Barrett of hell raiser performance passed away. As he was...- jonathanhudaon
- Post #15
- Forum: 4th Gen DIY
-
66rfe Swap Info
Not looking for an 8 speed. I have a buddy that has the 8 speed with a 6” lift and it’s always hunting for gears in and around town and it burns way more gas then my truck and I’m on a bigger lift with bigger tires. He has had multiple issues with his, his came with the 8. So the 8 speed isn’t...- jonathanhudaon
- Post #14
- Forum: 4th Gen DIY
-
66rfe Swap Info
See there another negative post. Lol I’m not looking to get close plus the 65 can not handle any power over stock. The 66 rfe can handle a lot more power as it uses the same internals as the 68 rfe. So there’s a whole aftermarket of bilet parts that can be used to handle well over a 1000 hp...- jonathanhudaon
- Post #10
- Forum: 4th Gen DIY
-
66rfe Swap Info
Thanks RodRamcar. Yeah I already got the spamming thing taken care of. Not the end of the world. Yeah I’ve tried asking my question mutiple times on different fb groups and all and usually I just get jokers commenting about 8 speeds or 6l80’s or 47re’s. I’m after building the closest thing to a...- jonathanhudaon
- Post #8
- Forum: 4th Gen DIY
-
66rfe Swap Info
Could see if it was an actual spamming issue where I was advertising something but anyways I guess the thread will be full of stuff about spamming and rules. Not about the actual info I’m looking for.- jonathanhudaon
- Post #5
- Forum: 4th Gen DIY
-
66rfe Swap Info
Did’t think it would be a big deal to have it in different categories but if it’s more of a hassle I’ll take two down- jonathanhudaon
- Post #3
- Forum: 4th Gen DIY
-
66rfe Swap Info
Been looking on all of the forums and fb pages. I can’t get the answers or the info, I’m looking for. I know I’m gonna get a lot of guys talk 8 speed swap. I’m gonna take a moment and say this if you’re looking to make that comment or you looking to insert your opinion on which transmission or a...- jonathanhudaon
- Thread
- Replies: 24
- Forum: 4th Gen DIY
-
F/S: BDS Upper Control Arms
Where are you located too? Sent from my iPhone using Tapatalk- jonathanhudaon
- Post #2
- Forum: For Sale
-
8” IFS Swap
You really aren’t understanding what I’m trying to say/ asking. I know exactly how to take the diff out, I’ve removed plenty of diffs. A straight diff swap is as simple as can be. That’s not what I’m talking about. I’m looking for tips on removing the motor mount bracket as I’m doing that job...- jonathanhudaon
- Post #9
- Forum: Exterior
-
8” IFS Swap
Yes I’m sure as this isn’t my first project. Do all my own work, I know but the space that I’m gonna be working in, I only have for so many hours. It’s like anything first time is the worse! So I can get it done as quick as possible was just looking to see what others did. Any tips or tricks, as...- jonathanhudaon
- Post #7
- Forum: Exterior
-
8” IFS Swap
Ok so all still the same diff. Yeah I have the motor mount bracket and all coming. Have done a lot of research on it. Like I said my biggest issue was finding threads of guys installing it themselves. Every time or I find a thread they brought it to a shop. Done allows if digging can’t find...- jonathanhudaon
- Post #5
- Forum: Exterior
Members online
- Edward Hands
- AlexC2350
- dieseldave
- dhay13
- Jchris56
- billygg420
- tron67j
- ABuchler
- chaosh1
- Ramfanski
- Jproven
- David H
- KKBB
- stevieb92
- RealTruck
- Sillygoose
- ZachG3500
- 1SLwLS1
- Brandon-w
- Frogman
- knightjp
- Large
- Lsujker
- tbowers391
- hdog33
- Marq
- Daw14
- KalboKalbs
- enuser
- Mike Townsend
- SitKneelBend
- Atcer2018
- rebelchild
- RebelDad
- bbykes
- 6speed4.7
- 62Blazer
- Ludville1
- Acetylene80
- Bron
- pinball_kdvc
- Zyphyon
- mboor1
- bucnut
- Papa Red
- JMod45
- Motoman501
- MethrenUnede
- KYPOTLICKER
- PA Ram