Recent content by Syciu

  1. S

    AlfaOBD

    Hi I have a question asking for help in solving it - it is about the front lamps and the parking / position light in the left front lamp. It is possible that it can somehow be set in the program only where? I start remotely Ram 2014 only turns on the right position and the left one does not...
  2. S

    AlfaOBD

    Hi. do you know what it can be and how to change it so that this inscription is not - Invalid Destnation Code? we have Ram from the USA and the radio is in EU. everything works but the inscription annoys me. maybe you need to change something with coding?
  3. S

    AlfaOBD

    Question - we had a small radio and installed a large 8.4 "uConnect radio - almost everything works - the temperature setting does not work - we only have LO or HI - where to look for something that will cause the correct temperature settings? Do you need to change something in the options that...
  4. S

    AlfaOBD

    can you turn off auto-closing - if you open the car with the remote control and do not open the door then the car will close after a while - can you turn it off?
  5. S

    AlfaOBD

    My adventure with the turn signals on the back was successful and thanks a lot for help but we are still trying to set the lamps in the front - after the remote start of the car we do not light the left position light and the right one works and the same when the low beam lights up the right...
  6. S

    AlfaOBD

    I will add for those interested - the Single Element Tail Lamp option is finally set to NO SET - in the case when I did SET there were emergency lights in the upper lamps and when this option is off I normally have the bottom indicators.
  7. S

    AlfaOBD

    Again thank you very much. I will let you know how something would change. And this Rear Tail Lamp DTC Disable option - what does it concern? Because it's only in the Left Door Ajar Usage function. There is no right when I expand the list.
  8. S

    AlfaOBD

    Hi Thank you for your help - it works great so far - I have a question - by setting these options to Disable, I only turn off the lamp diagnostics on the back or something else is turned off? In the left lamp option I saw the option - Rear Tail Lamp DTC Disable - but I set as you wrote the...
  9. S

    AlfaOBD

    can you somehow turn off error checking bulbs etc? refer to turn signals and stop?
  10. S

    AlfaOBD

    I enclose the BCM report and photos of errors in the subject of the rear direction indicators. I still have a question about one topic - the parking sensors at the back - work properly but after choosing the D gear and moving the car receives a signal and the Service of rear sensors is displayed...
  11. S

    AlfaOBD

    Hi. I come back again with the topic of converting the rear direction indicators to orange with us - thank you very much for the tips - they came in handy but we have one problem all the time and no idea - we used a new cable for the rear directions and connected it in BCM in F pin 42 and E pin...
  12. S

    AlfaOBD

    I plugged the missing pins on 42 and 3 and changed the settings on the outputs and switched the wires from the rear lamps and I have a turn signal in the place of the rear lamp but unfortunately I still display the error of the rear indicator - no matter what bulb I insert or ordinary or led -...
  13. S

    AlfaOBD

    somehow I am able to enable the option to display the current gear number on the cluster while driving? displays only PRND.
  14. S

    AlfaOBD

    three quick questions - The first question - when you start the engine remotely from the remote control turns on the seat and steering wheel heating but unfortunately the fan does not blow on the glass - as if it was turned off - can it be started somehow? It's nice as if the interior was...
  15. S

    AlfaOBD

    Has anyone programmed the Auto Power Folding function? What she give Do the mirrors automatically fold themselves when closing?
See more

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,336 (members: 60, guests: 1,276)
Robots: 1,956

Forum statistics

Threads
195,641
Posts
2,872,828
Members
156,471
Latest member
GAC57

Share this page

Top