theviking
Last Activity:
Nov 20, 2018 at 9:08 AM
Joined:
Apr 7, 2014
Posts:
927
Likes Received:
407
Media:
4
Albums:
1

Share This Page

theviking

Senior Member

theviking was last seen:
Nov 20, 2018 at 9:08 AM
    1. 68PowerWagon
      68PowerWagon
      When you did your tune did you do the ECU exchange? Or did you pay for the extra unlocked ECU? Price goes from $499 to $899. My grand plan was to do the exchange for $499, keep my ECU but purchase one from Ebay at $150 to send them back for the exchange. Wanted to see how you did it since you are one of the few who has done it with a newer 6.4
    2. theviking
      theviking
      They are wearing very well compared to the KO2's. I don't think you would have any trouble getting 40k out of them.
    3. Iron Outlaw
      Iron Outlaw
      He man, I saw you are running cooper stmaxx tires. How is the tread wear on them and how so they do in the rain? Think I can get 40000 miles out of a set.
    4. theviking
      theviking
      I didn't get the ceramic coating, and fortunately never had an issue with heat in the engine compartment. Ran the headers with no tune for several months since nothing was available for 2015's at that time. Only issue I had was an occasional code until the tune was installed.
    5. tim57
      tim57
      Hey Viking, I had asked you about your ARH long tubes and exhaust setup a while back. Anyway I'm ready to order my ARH long tubes and Tuner. I wanted to know if you had your headers ceramic coated? If not do you have any feed back on engine compartment temps, and were you tuned before your headers were installed.
      Thanks Tim
    6. theviking
      theviking
      Yes, I have a Traxda 605030 1.5" leveling kit and Thuren adjustable track bar up front. Looked at some other lifts but couldn't find anything with springs specifically for the 6.4, just the 1000lb heavier 6.7. I think the 295's will look great, if I did it again I'd go wider than my current 275's.

      Just installed the ARH 6.4 headers, amazingly still almost as quiet as stock. So just ordered the Magnaflow 19200 cat back kit. Then will tune it and maybe play with the airbox a bit.

      Good luck, let me know what you wind up doing.
    7. GotRam?
      GotRam?
      Hey what's up. Do you have a leveling kit ? I'm thinking of going Nitto Trail Grapplers 295x65x20 with stock rims. I'm not sure about adding a leveling kit or go with the AEV 3" suspension upgrade. What are your future plans. Thanks
  • Loading...
  • Loading...
  • About

    Ram Year:
    2015
    Engine:
    Hemi 6.4

    Signature

    2015 Ram 2500 CCSB Laramie, 6.4, 4.10's, ARH LT Headers, MF Cat-back, HF 93 tune, Edge 2600 converter, Moe's 87mm TB, Traxda leveling kit, Thuren adj. track bar, Centerline Grizzly 20x8.5 rims, Cooper S/T Maxx 35's.
    2012 Mustang GT, 1986 Mustang SVO, 2003 CBR 954, 2014 MDX
  • Loading...
  • Loading...