Morimoto hybrid xd turn signal not working

crash68 said:

turn the ignition on but don't start the engine, check the turn signals. If they don't work use a volt meter to check for power at the socket.

Click to expand...

Dinky said:

Alfaobd. They are probably led you need to change the settings

Click to expand...

rroche1982 said:

So they were working with the old lights. When I plugged the new ones in the don't flash at all. Truck says both front turn signals are out

Click to expand...

crash68 said:

I noted about checking the turn signals with the ignition on but the engine not running for a reason, it should bypass the BCM from turning the lights off.
Did you try flipping the plug over into the new headlights?

Click to expand...

rroche1982 said:

I haven't done this. They old lights were stock quads, which were not led.

I thought the morimotos we're plug and play

Click to expand...

hunterdan said:

The hybrids use the stock turn signals and sockets. So, there's no reason they shouldn't work unless you don't have them plugged in, especially if you're using the stock bulbs.

Click to expand...