Installed some Redrock mesh grille covers I got open box from American truck. Had to make my own mounting hardware.
Before
After
Before
After
What did you do with your 4th Gen this week?
- Thread starter VolsRam
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
RangerWeaver
Senior Member
- Joined
- Nov 20, 2014
- Posts
- 1,956
- Reaction score
- 649
- Location
- Lancaster Pennsylvania
- Ram Year
- 2011
- Engine
- V8 4.7L
Today I "repaired the dent in the bed side of my Ram.
Tomorrow morning I will be giving my Ram a bath to get the road salt and grime. I will also be degreasing the replacement door to prepare it to be wrapped on Monday.
Tomorrow morning I will be giving my Ram a bath to get the road salt and grime. I will also be degreasing the replacement door to prepare it to be wrapped on Monday.
RangerWeaver
Senior Member
- Joined
- Nov 20, 2014
- Posts
- 1,956
- Reaction score
- 649
- Location
- Lancaster Pennsylvania
- Ram Year
- 2011
- Engine
- V8 4.7L
Looks like I will be wrapping the door tonight (as long as the rain stops) as the vinyl arrived a day early.
18CrewDually
Senior Member
- Joined
- Nov 17, 2019
- Posts
- 2,043
- Reaction score
- 2,621
- Location
- U.S.- New Jersey
- Ram Year
- 2018
- Engine
- Cummins 6.7 H.O.
This week, I added a new hitch accessory. Grand Design 415G Momentum toy hauler. No more double towing. But alot more tail swing!
Tipicreeper
Junior Member
This week was Marketplace Sport rims, Craigslist Black Quads, and LED bulbs across the front. Oh yeah, after the quads, I had to tint the fog lenses.
- Joined
- Nov 21, 2018
- Posts
- 253
- Reaction score
- 292
- Location
- North Carolina
- Ram Year
- 2017
- Engine
- Hemi 5.7
Changed the oil, filter, cleaned the air filter, rotated the tires. Added a pair of lights to the roll bars (strobe capable) on the sides (already had the top mounted ones:
See the videos of them in action: https://photos.app.goo.gl/zbLxy7xuEJU6roS78
See the videos of them in action: https://photos.app.goo.gl/zbLxy7xuEJU6roS78
BenWade
Senior Member
Be sure to post some after pictures. I'm considering a wrap also
Hemi395
Senior Member
- Joined
- Mar 18, 2013
- Posts
- 8,989
- Reaction score
- 15,672
- Location
- Cape Cod MA
- Ram Year
- 2013
- Engine
- 5.7 Hemi
I don't believe you can add a video file to a post, just a link.
Im assuming its either leaking out of the weep hole or the bearings are noisy?
nkfgh233
Junior Member
- Joined
- Dec 21, 2021
- Posts
- 3
- Reaction score
- 6
- Location
- Woodbridge, Ontario
- Ram Year
- 2020 classic
- Engine
- 5.7
- Joined
- Jan 22, 2019
- Posts
- 4,290
- Reaction score
- 18,517
- Location
- Cheyenne, WY
- Ram Year
- 2018 2500
- Engine
- 6.7 CTD
Got it back from the body shop. Great bodywork(R&R) but, when they put on the Aero hood protector, they used the molding tape that was too thin and it didn't stick for squat. And the guy applying it must have been crossed-eyed. So I took it off, bought some new tape, spend 2 hrs taking the tape off the hood protector (the only thing it half-assed stuck to) to find out that I bought the same thin tape.
The license plat holder and it's mounting method is garbage from the factory. I had used toggle bolts to hold it on. Too hard to describe the without pics. Anyway, they put it on doing it "like factory" and the damn thing fell off. Messing with the hood guard took longer than expected and it will have to wait until thurs on my day off.
But it is shinny new bumper, headlight and grille
The license plat holder and it's mounting method is garbage from the factory. I had used toggle bolts to hold it on. Too hard to describe the without pics. Anyway, they put it on doing it "like factory" and the damn thing fell off. Messing with the hood guard took longer than expected and it will have to wait until thurs on my day off.
But it is shinny new bumper, headlight and grille
Last edited:
Stefan N
Senior Member
Spot on
Noise and I thought is was a pulley at first. Check "all" (2 pulleys) and no special play or wine when rolling them or fans. Drove for a week or two and checked again. The wiggle was real at that time on the Visco fan/water pump 
Disabled the fog drop and set for high & low beam on at the same time....much better in the dark areas I sometimes travel.
Biker
Member
- Joined
- Feb 16, 2015
- Posts
- 54
- Reaction score
- 8
- Ram Year
- 2012
- Engine
- diesel
Ordered a new tailgate
RamRod1
Junior Member
- Joined
- Dec 14, 2023
- Posts
- 8
- Reaction score
- 5
- Location
- Rockland County, New York
- Ram Year
- 2012
- Engine
- Hemi 5.7
Finally got my new license plates in the mail for my new 2012 Bighorn so I put them on and brought it in for an inspection. Failed inspection due to broken front driver's side swaybar link. I had to pay them to do new front links so I can pass. All good now
Hemi395
Senior Member
- Joined
- Mar 18, 2013
- Posts
- 8,989
- Reaction score
- 15,672
- Location
- Cape Cod MA
- Ram Year
- 2013
- Engine
- 5.7 Hemi
Yup, same happened with mine at around the same mileage. If you go OEM for the water pump its a different PN now which means its been revised so HOPEFULLY they improved the bearings....Spot on
Stefan N
Senior Member
Hemi395
Senior Member
- Joined
- Mar 18, 2013
- Posts
- 8,989
- Reaction score
- 15,672
- Location
- Cape Cod MA
- Ram Year
- 2013
- Engine
- 5.7 Hemi
Awesome, they didn't have the Mopar pump when I did mine!
TotallyHucked
Senior Member
- Joined
- Feb 23, 2023
- Posts
- 409
- Reaction score
- 733
- Location
- Gainesville, Ga
- Ram Year
- 2017 Sport CCLWB
- Engine
- 5.7
I need to quit putting it off and pick up a cheap Android tablet so I can get AlfaOBD. Was thinking about this mod just the other night, want my fogs to stay on with the lows/highs
Similar threads
Latest posts
-
-
Need help with 2011 Ram electrical short in drivetrain system
- Latest: cameroncbs
-
-
-
Staff online
-
mikeruSuper Moderator
Members online
- Fltlander
- hodge-xj
- jawzs2
- michaelcarlson2
- CROD
- duckman631
- srv1
- Dmoe0911
- westcoasting
- tzmndvl308
- Demon13
- HydroTopzz
- commander
- TC
- sy440
- buckeyexx
- Ozznutz
- hwood
- Dean2
- Rhett55
- jmvienneau
- GTyankee
- rynods
- Recon5869
- TinaG
- s_wall98
- mikeru
- 6speed4.7
- Vilianaywp
- Schlagernaut
- Choicebro
- Bjervis
- StateOfMind
- c85jl
- pir8t
- wallacemf
- fermorales0731
- northlane1
- ric221
- sigfla
- CRS1968
- MTaylor77
- RamInnIt
- cameroncbs
- Slinge
- JakeFox
- Ram028
- BoomBoom5T4
- bwolfe1
- Docwagon1776