The "gunk" caught by an oil catch can on a Chrysler/RAM Hemi engine (such as the 5.7L, 6.4L, or 6.2L Hellcat) is a highly corrosive, toxic chemical cocktail. Because Hemi engines operate with relatively
high compression and feature short piston skirts with fewer rings, they are notorious for producing a significant amount of
crankcase blow-by
A typical sample drained from a Hemi catch can contains a mix of the following chemicals and compounds:
1. Water Vapor and Condensed Moisture (~70%)
The largest component by volume, especially in colder weather, is
dihydrogen monoxide (H₂O). Water is a natural byproduct of the hydrocarbon combustion process. When the engine cools down or runs before reaching full operating temperature, this moisture condenses in the crankcase instead of burning off.
2. Unburnt Fuel (Gasoline) (~23%)
During the compression and power strokes, raw
hydrocarbons (gasoline) are forced past the piston rings. This raw fuel contains various aromatic hydrocarbons like
benzene, toluene, and xylenes. It is particularly heavy during cold starts when the engine runs in a "rich" fuel-enrichment mode.
3. Engine Oil Mist (~7%)
The rapid movement of the Hemi's crankshaft and rods whips the engine oil into a fine mist and froth. This vaporized lubricant contains
- Base oils (heavy hydrocarbons/polyalphaolefins if using synthetic oil).
- Zinc dialkyldithiophosphate (ZDDP) and other anti-wear additives.
- Calcium or magnesium detergents.
4. Highly Corrosive Acids
When the water vapor mixes with sulfur and nitrogen byproducts from combustion, it undergoes chemical reactions to form strong acids:
- Sulfuric Acid (H₂SO₄): Formed from trace sulfur elements in the fuel.
- Nitric Acid (HNO₃): Formed from nitrogen oxides (
NOxcap N cap O sub x
) generated under the intense heat and pressure of the Hemi combustion chamber.
5. Abrasive Particulate MatterSuspended inside the oily liquid are microscopic solid chemicals and elements:
- Carbon / Soot particles: Amorphous carbon black from incomplete combustion.
- Trace wear metals: Microscopic particles of iron, aluminum, and copper sheared from internal engine components.
Why This Matters for a Hemi
If you don't use a catch can, the
Positive Crankcase Ventilation (PCV) system bakes this acidic slime onto your intake manifold, throttle body, and valves. Furthermore, introducing these unburnt fuel vapors and oil mist back into the combustion chamber lowers the effective octane rating of your fuel. This triggers the Hemi's knock sensors, prompting the PCM (computer) to
pull ignition timing, which directly robs your truck or car of horsepower.
Note: Because this liquid is highly acidic and contaminated with raw fuel, never pour it back into your engine oil fill neck. Always dispose of it safely with used engine oil