Search results

  1. Jerrad Roberts

    Install inverter and outlet

    Yeah I am going the factory route and I tried turning them all on. I am not sure if they helps because I found there is also a wire that runs from the kick board mount to the ECM. I did not install that wire because the instructions said that was optional.
  2. Jerrad Roberts

    Install inverter and outlet

    So I bought a kit to install my inverter and I'm just coming to the support to see if I messed something up. I posted pictures showing what I got. The thick orange wire goes to the main fuse box by the battery and tested it is getting 12 v. The actual outlet plug..dont mind the blue wires I cut...
  3. Jerrad Roberts

    Dc to dc charger mount?

    That is what I am talking about. I am just wondering if anyone has any stories about staying away from certain ones or anything.
  4. Jerrad Roberts

    Dc to dc charger mount?

    So I redid my electrical in my 5th wheel and went with victron. I now want to add in their dc to dc charger but I need a mount to plug it into when I plug in the 5th wheel. I have seen a few videos of like red clips that people use as it's just a 6 gauge pos and neg hook up. I'm just wondering...
  5. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    If you watch those two videos it is very simple. My impatience is what got me. Are you looking to the few vendors that sell the cord or thinking of making your own? I tried to get in contact with all of them and had 0 luck but maybe they were just really busy.
  6. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    Ok meant to give an update this morning but the back up camera wasn't working at all. I had the buttons I was supposed to, and the cargo cam worked, but no back up. Decided to wait and went to pick up my 5th wheel. Shut it off to run into my house before I left and came out, all is working as...
  7. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    That is actually where I learned to make the harness. I had to alter it a little bit because his goes to the connector on the driver side door and mine wasn't wired for that so I went straight into the radio. That wouldn't effect it would it? I imagine the connectors from the kick panel just...
  8. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    This unit is one I replaced as I had the 3.0 and upgraded to the 8.4. I have tried all 3 reset options in settings, pulling the fuse and holding the top right corner for 6 seconds, none of them seem to do anything. Got up this morning and doesn't seem to have changed anything sadly :(. When I...
  9. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    yeah it pops up randomly when I first start the truck. Its not every time but I would say about 50% i get that message or instead of it being low I get the same thing but it says high. It's really odd and no one seems to have ever seen it before.
  10. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    Here are the pics
  11. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    Just went to check and I do indeed have my buttons back (Controls and Cargo Cam); however, still waiting on the keys to switch from backup to cargo cam. Still giving it time, but as of now everything is back to when I originally posted. Since I got a few of you helping out...ever see the...
  12. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    Always wondered where that fuze was. I did pull it, but...now I don't have a "control" or "cargo cam" soft key. Nor has the original issues fixed it self. I guess now it is just the waiting game until tomorrow and hopefully they all pop back up.
  13. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    yeah I had did a "hold top right corner reset" on it briefly before this. They did all load and still nothing. Those 5 days the camera wire was ran but no camera was actually hooked up. It just said camera not available. I just fully installed the camera today. I am not sure if that makes a...
  14. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    Both of those are turned on in alfaobd and it's been probably 4 days. I don't really drive my truck much. As shown in the pic I have the cargo cam option and it works..but when I put it in reverse it changes and I have no buttons...seems very odd.
  15. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    yeah I don't have those buttons and that is what I'm trying to figure out how to get.
  16. Jerrad Roberts

    Has anyone been able to enable to the cargo camera switch feature?

    I got my cargo camera all hooked up and it works if I push the cargo camera button on the radio, but when I go into reverse it switches to the main backup camera. In almost every video I have seen there is usually a softkey uptop that will allow you to switch between the two camera in order to...
  17. Jerrad Roberts

    Power Inverter

    So here is the thing, I bought the inverter kit from 4th Gen Electronics because I wanted to get the AUX kit as well. Aux kit, easy install works great. Inverter and outlet, not so much. Lots of issues and cannot get ahold of anyone from the website for a refund nor any type of help with issues...
  18. Jerrad Roberts

    All Repair Parts @ Employee Cost!

    Looking for just the camera piece in the cargo cam. 2018 ram 3500. I have the brake light and there is a hole for the camera. Says it is the stock mopar camera.
  19. Jerrad Roberts

    Cargo Camera

    It has a spot for a camera I just need to know the mopar piece.
  20. Jerrad Roberts

    Cargo Camera

    The problem is I got the tail light but there is no camera installed. There is a hole for one. I just cannot find the part number that should be in there. All the websites show a picture and it's labeled like (1) Taillight (2) Camera but doesn't say part number "x".
  21. Jerrad Roberts

    Cargo Camera

    Anyone know what the camera is that actually goes into the brake light? I got the Dorman 923-061 but it didn't come with a camera.
  22. Jerrad Roberts

    Control softkey on 8.4 screen 2018 Ram 3500

    I upgraded my screen from the 3.0 to the 8.4. I have added the cargo camera but on my screen I do not have the control soft key. Everywhere I look they have one, but mine for some reason does not and I cannot find a setting to turn it on. I have alfaOBD. Any help with this would be greatly...
  23. Jerrad Roberts

    Puck to shark fin upgrade?

    Got it. So it seems like it is pointless to upgrade it. On to my next upgrade project.
  24. Jerrad Roberts

    Puck to shark fin upgrade?

    I am upgrading to the 8.4 and I have the puc already. I know I don't have to upgrade to the fin, but has anyone seen any posts of people doing it? I have been looking and seen a couple people that did it, but they don't say if the u connect stuff actually works. The best post I found said that...
  25. Jerrad Roberts

    400 w inverter in 4th gen?

    I thought about going with an after market. I seen a video of a guy that takes the chip out of the own outlet and just wire it from the inverter. That wouldn't be bad I guess. Maybe run it to a switch to turn on and off. Maybe put on hold until I get the aux switches if 4thgenelectronics ever...

Latest posts

Staff online

Members online

... and 13 more.
Total: 1,421 (members: 63, guests: 1,358)
Robots: 1,951

Forum statistics

Threads
195,639
Posts
2,872,818
Members
156,469
Latest member
amadhi89

Share this page

Top