canbus
-
B
Heated Seat Module Issue
My heated seats and wheel stopped working and I cant get my alfa obd to connect to the heated seat module under the "driver seat" module of alfaOBD. Which module do I scan to get a code saying that it can't be found on the network? I already traced all the wires and all had acceptable...- broteinshake
- Thread
- alfaobd canbus heated seat
- Replies: 1
- Forum: Audio & Electronics
-
J
Turn signal errors after LED headlight bulb install
I installed LED high & low beam bulbs in the factory halogen housings, and enabled the LED option for both in AlfaOBD. Took a few days for the headlight errors to stop occurring, but I've been getting front & rear turn signal errors ever since, and I can't seem to figure out what's up. All turn... -
Intelligent Battery Sensor Readings
I Changed my battery recently and was concerned the battery I replaced the OE battery with is Absorbent Glass Mat ( AGM ) and not , ( FLA ) Flooded Lead Acid but is still the same Group Size Item Number 852241 Group Size H7 (94R) CCA 765 CA 955 Voltage 12 RC 140 Ah 80 Length...- Mister Luck
- Thread
- battery canbus charging ecu obd pcm
- Replies: 2
- Forum: Audio & Electronics
-
V
Issues w/ PAC BCI-CH41
Good morning all, I have been working on a comms issue with a PAC BCI-CH41 for the past week and can't seem figure it out. I have a 2015 RAM 2500 w/ an 8.4" VP3, I originally installed the PAC module back in April 20'. It has worked perfectly fine up to two weeks ago, the wife and I were out...- voodoohax
- Thread
- aftermarket back up camera canbus radio
- Replies: 0
- Forum: Audio & Electronics
-
CanBus keeping dash and shift indicator lights on 24/7
I recall reading some threads last year about the issue I'm having but can't find them anymore. My 2016 Ram 1500 Sport has 125,000 miles on it and has been the perfect truck up til the day I bought Yukon Denali, literally the next day my Ram decides to not start (dead battery). I replaced the...- Shane Allaire
- Thread
- canbus dash lights stay on dead battery
- Replies: 12
- Forum: Engine & Performance
-
G
Led Bulbs In An Aftermarket Casing
I'm looking to put led bulbs into a 2008 1500. The aftermarket casing takes an H7 bulb instead of an H13. When you buy an H13 designed for a your model it comes with a decoder included. H7's don't say anything about a decoder. Do they need a decoder for them to run smoothly or is it even... -
S
How can I verify FCM/TIPM compatibility?
Wife calls me last week and let's me know that she turned off her 2012 Ram 1500 5.7l off and while the gauge cluster went dead the engine continued to run. So I plug in a code reader and I've got a handful of can bus issues. TIPM, ABS, and FCM codes. Everything but the FCM clears. It is my...
Members online
- Andre67
- Bigbubba78
- RamCares
- BearlyFunctioning
- express2014
- Got 1
- Toycar
- clay282
- Amstras1
- Curmudgeon
- Thendrix
- Tom Davis
- Sweetee
- LeeD
- tnctx02
- WVPOWERMAN
- armyvet25
- PA Ram
- G-Ride990
- Units
- FullForceRam
- RebelDad
- marine0311
- Ramtastico
- Kingsize
- Docwagon1776
- Nbonco
- Scout51
- RamDiver
- Peragon
- Griffin
- Fuel35 67
- max2bob
- StateOfMind
- CanuckRam1313
- emjohn4
- andygl
- AEDELGOD
- gunflintguy51
- Lsujker
- Rastas