failure
-
Z
Engine replacement 2010
Hello all. So I was recently on a trip from Ca to Tx. 2010 1500 Laramie 4x4 Truck decided to go down on me at the furthest point from home, and had to have it towed home. My question is, I'm told that the engine suffered a catastrophic failure, rounded a cam lobe. Prior to the problem, I...- Zerpda
- Thread
- engine failure jasper replacement
- Replies: 9
- Forum: Engine & Performance
-
B
2009 Power Steering failing intermittently
Several weeks ago I started hearing a whining noise coming from the engine compartment and determined it was the power steering pump. Replaced it along with the serpentine belt. In parallel, I have been having issues with AC/heater. After the power steering pump was replaced, I took it to a...- brcallicott
- Thread
- 1500 laramie failure intermittent power steering
- Replies: 1
- Forum: General Discussions
-
2
High pressure fuel pump in 5500 model?
Just bought a brand new 0 miles custom order 2022 Laramie 5500 chassis truck, drove it 405 miles and it lost power on the highway from 70mph down to nothing, and then failed to start again. After reading the horror stories of brand new $100k trucks bricking themselves before 1000 miles with cp4...- 2022_5500
- Thread
- 5500 cp4 cummins failure fuel pump
- Replies: 4
- Forum: Heavy Duty
-
C
Watch Idle Hours & Change Oil every 3k Miles to Avoid Engine Failure!!
If you own 2014-2018 heavy duty with 6.4 Hemi; do yourself a favor and try to never idle engine and change oil every 3k miles or earlier. If you can’t do those 2 things, get rid of truck now! Just went 2 months without a truck due to engine failure and $9,000 later(for rebuilt) due to having...- Coming in Hof
- Thread
- 4th gen 6.4 hemi failure heavy duty ticking noise
- Replies: 79
- Forum: General Discussions
-
GM DFM and AFM lifter failure - class action lawsuit
This needs to hapen ASAP to RAM and the other Stelantis brands that use HEMI engines in their vehicles so that this endless debate over what causes lifter failure and what kind of lube to use to mitigate it ends. It's a manufacturer issue on the supplier side and possibly incorect assembly of...- Rod Knock
- Thread
- afm cam dfm failure hemi lawsuit lifter mds ram stelantis
- Replies: 6
- Forum: General Discussions
-
Cam Failure Poll
Tons of speculation out there, this is just an attempt to get some numbers. Please only vote yes if your 5.7 suffered confirmed cam failure not just some other ticking sound. Let's make some data happen!- kurek
- Thread
- cam cam failure failure hemi tick lifter tick
- Replies: 64
- Forum: Engine & Performance
-
F
FCA Customer "Care"
Not feeling very well cared for after waiting over four months to be reimbursed for parts & labor to remove and replace failed crankshaft position sensor and tone/reflector wheel that is supposed to be fully covered by the AEM 40k extended emission warranty. Failure occurred while on an...- farkels
- Thread
- aem crankshaft failure reimbursement sensor warranty issue
- Replies: 16
- Forum: Introduction
-
2013 5.7L Cam/Lifter issue
Alright, after chiming in on a few others I’ve decided to start my own thread. I’ve got a 2013 Ram 1500 5.7L crew cab/short bed 4x4 with 33,900 miles on it. It’s got a 4” lift with 325/60r20 tires, upgrade from 3.21 gears to 3.92’s, and a few bolt ons (vararam CAI, moes 87mm TB, ARH LT’s, pedal...- Reaper
- Thread
- cam failure lifter
- Replies: 35
- Forum: Engine & Performance
