obd

  1. Storman22

    Which OBDII reader is best for 2023 Ram 1500?

    Looking to pickup an OBDII reader and then wanting to access and change tire size , as well as potentially make other changes such adding off road info screens etc for other options. Is a bypass cable required for any changes… and is the OBDLink MX+ at $209 CAD worth the price or are there...
  2. Mister Luck

    Intelligent Battery Sensor Readings

    I Changed my battery recently and was concerned the battery I replaced the OE battery with is Absorbent Glass Mat ( AGM ) and not , ( FLA ) Flooded Lead Acid but is still the same Group Size Item Number 852241 Group Size H7 (94R) CCA 765 CA 955 Voltage 12 RC 140 Ah 80 Length...
  3. R

    Issue with LED rear turn signals.

    Hello everyone, I had my LED factory tail lights go out and decided to replace them with aftermarket ones. Everything works fine, the truck is configured for LED already but I still get turn signals (both sides) out. But they physically do work normal. Here is the error code I keep getting on...
    • Richierich84
    • Thread
    • code b1642 error led lighting obd rear lights turn signals
    • Replies: 3
    • Forum: Exterior
  4. mks1775

    Alpha OBD help?

    So I did not have logging enabled before I made some changes. Long story short, my intermittent wiper s setting do not work. The active when turn on, in low and high....but not in the intermittent settings. Any advise or help?
  5. S

    Service park assist sensors???

    So going to be a few questions in this thread so bear with me. I started getting the service park assist for the front sensors about a month ago and since my truck is still under warranty I called the dealership (2017 Laramie 1500). Evidently the warranty doesn't cover diagnostic fees and I...
  6. G

    AlfaOBD troubles

    Hello everyone So I installed aftermarket headlights (Alpha Rex) and like everyone else get the “Parking Light” code. I purchased the OBDLINK MX+, purchased an Android tablet and bought the AlfaOBD app. When I try to make a change AlfaOBD gives me the message “Procedure completed, but status...
  7. XXSNOTRODXX

    AlfaOBD performance mode?

    I’ve seen some mention enabling performance mode on there EVIC. I’m about 1/4 of the way through the alfaobd thread and have yet to see anything about it. can anyone confirm how to enable “performance mode” ?. here’s a picture (not my truck) of the mode activated in the evic. thanks in...

Latest posts

Staff online

Members online

Total: 392 (members: 14, guests: 378)
Robots: 1,285

Forum statistics

Threads
195,652
Posts
2,872,934
Members
156,490
Latest member
OasisNinjaBat

Share this page

Top