1.5 , 1.75 or 2.0

[BiGMERF]

Looking to take advantage of boras Memorial Day weekend sale. I ordered some flares and I'm wondering what size spacers I should get with my setup. What do you think?
Setup
20x9 0 offset wheels
275/65 tires

Thanks

 

[Farmer Fran]

-3.0 + 4.5

imho

 

[BiGMERF]

-3.0 + 4.5

imho

Say what ? Lol

 

[Farmer Fran]

And put some hooks on the front of that Rig

 

[Farmer Fran]

Say what ? Lol

1.5

 

[anthony2558]

Got a link for this sale?

Sent from my Pixel using Tapatalk

 

[BiGMERF]

Got a link for this sale?

Sent from my Pixel using Tapatalk

It's on their fb page.

 

[anthony2558]

Ah. Don't have FB.

Sent from my Pixel using Tapatalk

 

[BiGMERF]

Ah. Don't have FB.

Sent from my Pixel using Tapatalk

Give me a sec. I'll get the email. All you have to do is mention the deal.

 

[BiGMERF]

775.530.2483. That's their number. Mention the deal. Think it ends today

 

[quietpeen]

are you leveled? bilsteins? 2.1? 2.8?

 

[BiGMERF]

are you leveled? bilsteins? 2.1? 2.8?

Yes I am leveled 2.1 bilsteins

 

[quietpeen]

I would not go bigger than 1.5 since you are at 2.1 on the bilsteins - any more and you will most likely rub with your tires.

For reference with 1.5 spacers and your wheel specs it would match a 20x10 wheel with -24mm offset(4.5" backspacing)

 

[BiGMERF]

Really ? Rub on what ? The fender ? Will 1.5 look ok with the flares ?

 

[quietpeen]

i get slight rubbing on the fender liner cab side of the wheel well, and my wheels have 1/2" less backspacing than what you would be equivalent to with 1.5" spacers.

what fender flares did you buy?

 

[BiGMERF]

 

[quietpeen]

look at robocop_09's pics in the great flare thread. His wheels are 20x10 -24mm offset and he has similar flares. His tires are about 1.5" wider than yours though so his tires will stick out farther than your 275's will

 

[BiGMERF]

The way I look right now. Where would I rub?

 

[quietpeen]

in that picture to the right on the bump out of the fender liner at the bottom. I could be slight, but the further you push the wheels out the more it will rub and more stuff it will rub

 

[Witch]

I would get the flairs on than check for clearance in real time

If you can possibly get 1.75" or 2" you will not have to trim the studs

1.5" or less and you have to cut them down so you wheel will fit tight to the flat of the spacer