Sam Davis
Junior Member
the number 4 coil had a spark between the boot and the top bolt that held the coil down and truck ran fine no engine light, so 8 new coils, new plugs, 30,000 miles on the old ones, new wire loom across the top of intake manifold, fired it up after replacing with the new parts, it seemed to be missing, rough idle, checked all my wires all good pushed them all down, fired back up and runs fine, but the check engine light came on, P2314 is the code ignition coil secondary circuit, drove it today ran great from 6AM this morning start and stop till 1;30 shut it off when I started it back up it was missing, brought it home pushed all the wire connections again and runs fine, so how do I check for a bad connector??