2011 RAM 1500 ST - CC, 4x4, 4.7 + AT - having issues with LED bulbs on 2 bulb (not quad beam) headlights.

[skruface]

Hey all,

I recently reinstalled some LED headlight bulbs into my 2011 RAM 1500 ST (2 bulb headlights, not quad bulb) with aftermarket CANBUS decoders.

The left bulb (driver's side) works fine on low/high beam.

The right bulb (passenger side) lights up on low beam, but the second I switch to high beam, it goes out.

Looking for any advice to correct this issue.

Tech info:
Bulbs are FAHREN Forenner H13/9008 dual beam bulbs:

Forenner Fahren 2023 Upgraded H13/9008 LED Headlight Bulbs, 24000LM Ultra Brighter, 1:1 Size Hi/Lo Dual Beam H13 9008 LED Bulb, 6500K Cool White, Direct Installation, Pack of 2, Fog Lights - Amazon Canada​

Forenner Fahren 2023 Upgraded H13/9008 LED Headlight Bulbs, 24000LM Ultra Brighter, 1:1 Size Hi/Lo Dual Beam H13 9008 LED Bulb, 6500K Cool White, Direct Installation, Pack of 2 in Fog Lights.
www.amazon.ca

CANBUS harness is a Xsprite H13 CANBUS harness:

Xprite H13 LED Headlight Canbus Anti-Flicker Harness, Bulbs Resistor Decoder Error Free Warning Conversion Kit (1 Pair), Ballast Resistors - Amazon Canada​

Xprite H13 LED Headlight Canbus Anti-Flicker Harness, Bulbs Resistor Decoder Error Free Warning Conversion Kit (1 Pair) in Ballast Resistors.
www.amazon.ca

I should mention I have an OBDLink LX bluetooth module with ALFAOBD installed on my Android phone, and have tried to use ALFAOBD to find/change the headlight voltage warnings in the Body Control Module as per the many, many YouTube tutorials available online, but the tutorials mostly focus on the 2013+, which has a somewhat different CANBUS system than the 2009-12's.