Jason Jessome
Junior Member
I HAVE A 2013 RAM 4X4 SERVICE LIGHT IS ON WITH DTCM C1464 front axle control circut low code coming up any ideas on a fix for this thanks
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Luckyyy! Wish I had the better right diagrams and stuff. [emoji1787]
Hope this helps. And looks like full 12v needed at that pin. Says use test light and compare brightness to brightness when connected to battery. Doing it with a test light verifies integrity. With a volt meter its not carrying load. Also says to disconnect from the FAD and DCM before doing this test. Probably to protect circuits
Sent from my iPhone using Tapatalk
Luckyyy! Wish I had the better right diagrams and stuff. [emoji1787]
I'm gonna look into that! All the wiring and stuff I do it'd be great. And all data is hella lots here. The states gets cheap subscriptions are are yearly at like $300. I usually bug my parts guy or another member I'm friends with who has all data for diagrams. [emoji16] But I'd love to have my own that's for sure. Thanks man!Ebay, download, cheap, con= you take a chance when getting. This one said covered lots of models but only a 14 which is good for many. Also some of the fuel system, part has wrong pictures, driveline pics. LOL. Wasnt much like 15 or 17 dollars maybe?
I'm gonna look into that! All the wiring and stuff I do it'd be great. And all data is hella lots here. The states gets cheap subscriptions are are yearly at like $300. I usually bug my parts guy or another member I'm friends with who has all data for diagrams. [emoji16] But I'd love to have my own that's for sure. Thanks man!
I HAVE A 2013 RAM 4X4 SERVICE LIGHT IS ON WITH DTCM C1464 front axle control circut low code coming up any ideas on a fix for this thanks
I wonder if ramcares offers discounts for forum members who are recomended to go to the dealer? It would possibly give us someactual incentive to visit a dealer instead of avoid it. Just an idea....Hi @Jason Jessome - If you are not able to determine a solution based on the suggestions of fellow forum members, I recommend reaching out to Canadian Customer Care to have this documented. You may find their contact information by clicking on the following link and scrolling down to the "Canada" tab: https://www.fcagroup.com/en-US/footer/Pages/contacts.aspx.
Mark
RamCares
It's only 4 wires if you have a multimeter and some spare wire you could easily test it. Any local shop should be able to easily do this as well.so i also replaced the the transfer case acuator still no luck just wondering whats my best bet should i take it to my dealier or to an auto electricians shop to trouble shoot my wireing issue thanks
so i also replaced the the transfer case acuator still no luck just wondering whats my best bet should i take it to my dealier or to an auto electricians shop to trouble shoot my wireing issue thanks