2014 Dodge Ram 3500 Hemi 6.4 displays acquiring signal does not connect

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

newandlearning196

Junior Member
Joined
May 25, 2022
Posts
1
Reaction score
0
Location
Farmington, New Mexico
Ram Year
2014
Engine
6.4 Hemi
I am having problems with my 2014 Dodge Ram not connecting to Siriusxm. I was connected in the past but started displaying acquiring signal but never connects. Have spoke to XM on several occasions and they run their test and state that its not on their end but something with the radio. Help would be greatly appreciated.
 

2020PW

Senior Member
Joined
Nov 6, 2021
Posts
668
Reaction score
675
Location
East coast
Ram Year
2020
Engine
6.4
If you have Uconnect® version 8.4, here’s how to perform a soft reset:

  1. With the car in park, turn the ignition on to “Run.”
  2. While doing this, simultaneously press and hold the volume knob and tuner knob at the same time for about 10 to 20 seconds.
  3. If done correctly, the display will flash your vehicle’s brand and attempt to restart.
If you run into any issues with your Uconnect® infotainment system, it’s best to have our service professionals restart it for you!
 
Top