2016 Ram 2500 6.7l Transmission Problem?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dwall2181

Junior Member
Joined
Jun 8, 2022
Posts
1
Reaction score
0
Location
Charleston, SC
Ram Year
2016
Engine
6.7L Cummins
Hi guys,

I changed the transmission fluid on my 2016 Ram 2500 6.7l Cummins and noticed what looks like possible cracking in the valve body on the 68RFE trans.

How concerning are these cracks and what do you recommend?? (pictures attached)

I do have a bit of shudder in overdrive at very low RPM's that goes away as soon as I give it some pedal. No shudder otherwise. I run a 75hp tune and I thought that was the standard torque converter shudder you hear about with the 68RFE.

Thanks for any help.

D3EC5401-8682-443E-A71B-8B9D6D51533A_1_105_c.jpeg7B30ABA7-E425-4D4B-B196-851B26EFB800_1_105_c.jpeg06D26F07-C6A6-49F3-9877-1F59BB2DB2B1_1_105_c.jpeg8B4B30BC-A111-4AAC-868E-91E7BDDAC04D_1_105_c.jpeg
 

bigdodge

Senior Member
Joined
Jan 3, 2014
Posts
523
Reaction score
310
Those are not cracks. That's just some roughness from the casting process
 

mtnrider

Senior Member
Joined
Sep 25, 2014
Posts
3,184
Reaction score
3,438
Location
Georgia
Ram Year
2016
Engine
6.7 Cummins
Casting marks, nothing to worry about. The shutter in OD is most likely your clutches slipping (going out). That 75hp tune is going to cost you a trans rebuild Real soon...


.
 
Top