3 inch supreme suspension leveling kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

moomba

Junior Member
Joined
May 8, 2012
Posts
11
Reaction score
0
Ram Year
2010
Engine
Hemi 5.7
Noob here with 2010 1500 4wd CC and I have searched for any advice concerning the supreme suspension 3 inch leveling kit without any luck. Can anyone here give any advice? Wanting to run 20 x 10 fuel hostage with 4.5 back spacing and 305/55/20 nitto terra grapplers. Was going to go with the 3 inch to gain the clearance for the width and wider stance back spacing. Will a 2.5 work with no rubbing.
 

Stangshcky12

Senior Member
Joined
Oct 26, 2011
Posts
9,046
Reaction score
942
Location
Oshkosh, WI
Ram Year
2007
Engine
5.9 Cummins
Not sure what that tire size actually measures to but I think you would be fine with a 2.5" level and a 5" backspace
Then again I'm not an expert on 4th gens and I'm sure someone will give you better advise
One thing I can tell you is to stay away from any 3" level"

2.5" is about the max before you start causing big problems or stepping up to an actuall lift kit
 
OP
OP
M

moomba

Junior Member
Joined
May 8, 2012
Posts
11
Reaction score
0
Ram Year
2010
Engine
Hemi 5.7
Thanks for the response. Will I have any rubbing issues with 2.5 level running 20x10 with 4.5 back spacing and 305/55/20?
 

quietpeen

Senior Member
Joined
Jul 14, 2010
Posts
25,443
Reaction score
3,913
Ram Year
2021 TRX
Engine
Hellcat
Thanks for the response. Will I have any rubbing issues with 2.5 level running 20x10 with 4.5 back spacing and 305/55/20?

no you should not have any issues running that setup
 
Back
Top