315/75/16 on stock wheels?

[nitto]

Well its time I need a tire replacement. I have been out of inspection for the past week. I was going to just get 285/75/16 nitto's but I ordered a "hell bent steel 2.5" for my truck today so would I be able to throw on 315/75/16 on my stock dodge wheels?

 

[Badger]

Not without rubbing on the control arms. Your gonna need wheel spacers or aftermarket rims.

 

[nitto]

i have been looking up and researching it a bit lately and most of everyone I read they only rub at full turn. so i could get away with it till get wheel spacers right? and how much would i need for my spacers 2"?

 

[Badger]

Measure the back of your truck from the ground to the top of the rear wheel well. Then do the same to the front. subtract the front from the rear and thats the lift you need.

 

[nitto]

its not the height im worried because I have seen plenty of 2.5" levels keep 35's under fine its that since there 315 not 285's they are alittle wider so im wondering how much more space of wheel spacers i'll need to keep from rubbing my a-arm at full lock

 

[Badger]

2 or 2.5 then it really wont matter.

 

[nitto]

ok yeah well see i guess

 

[mikemitchell407]

i wanna see some 2.5inch lifts with 35s pics plz

 

[logikfive]

Did you ever get these installed?

I'm curious as well what it looks like.