37x13.5's on 20x10 -24 or 20x12 -44

[kowbel11]

I have done some searching but looking for a little help. I have a 6" zone lift with bils @2.8. I am running 35's on a 20x9 1 offset and don't like the stance on a lifted truck so I want to go wide. looking for people running either of these setups and how much if any trimming is involved? From what I have read the -44 seems like a long shot to fit with out quite a bit of trimming or more lift. I have seen a few -24s but unsure if anything else is needed. The tires I am looking at state they measure a true 37 and come in at 14 wide and are not offered in a 12.5 wide. Thanks in advance for the help!

 

[BiGMERF]

from what i see.. most who have a 6 inch lift run 35x12.5 -44.. check www.customoffset.com and enetr the stats in the gallery.. im sure you will find something

 

[MarshRam]

6" Procomp with -44 offset, but I have 35's. There was very slight trimming to the lower valance. But, at the time the front shocks were set at a 4" lift. I would have to check when I get home, but I don't think the trimming would have been necessary with the 6" stance.

 

[JB1]

We have a few members here running that setups but most have a small body lift added

Jameson

http://www.ramforum.com/threads/swapped-to-fuel-forged-24x14s.106640/

Bighorn 4 life

http://www.ramforum.com/threads/9-25-total-lift.109685/


Drummin4jc’s

http://www.ramforum.com/threads/drummin4jcs-2012-ram-1500-build-thread.79193/

 

[2010 Infantry Vet]

My vote is for 12” wide wheels. I have 37x13.50x20 toyo MT mall crawler tires on 9” wide XD addict wheels. If my truck didnt come with these wheels, I would have bought 12” wide.
I have 6” RC lift and bils set at 2.8” and didnt have to trim anything. No rubbing either.

 

[BiGMERF]

My vote is for 12” wide wheels. I have 37x13.50x20 toyo MT mall crawler tires on 9” wide XD addict wheels. If my truck didnt come with these wheels, I would have bought 12” wide.
I have 6” RC lift and bils set at 2.8” and didnt have to trim anything. No rubbing either.

View attachment 130118

Nice truck !!


Sent from my iPhone using Tapatalk

 

[S0CAL]

If the stance is the issue and you like the wheels and tires, how about hub-centric spacers (BORA)? Cheapest route.

 

[kowbel11]

Thanks for the replies! I have seen a couple with the wide stance as jb1 said but I think with a body lift which I don’t really want to do right now anyways. I know I can fit the 35s but I would like to fit 37s if I could. Spacers are an option but still would like to fit the 37s

 

[JB1]

Thanks for the replies! I have seen a couple with the wide stance as jb1 said but I think with a body lift which I don’t really want to do right now anyways. I know I can fit the 35s but I would like to fit 37s if I could. Spacers are an option but still would like to fit the 37s

which tire are you getting that claims to be a "true" 37

 

[kowbel11]

amp mt's is what I was looking at

 

[kowbel11]

My vote is for 12” wide wheels. I have 37x13.50x20 toyo MT mall crawler tires on 9” wide XD addict wheels. If my truck didnt come with these wheels, I would have bought 12” wide.
I have 6” RC lift and bils set at 2.8” and didnt have to trim anything. No rubbing either.

View attachment 130118

Do you have a picture from the front? I would like to see how close to even you are with the flares. Really what I would like to do is run 37's that are even or slightly past the flares.

 

[MarshRam]

@kowbel11

Have you found any good longevity reviews on those Amp M/T's. I put a used set on my 07 TRX4 once just to try them out since I couldn't find any reviews. They wore down to nothing real quick. They were probably just under half tread when I got them and they were toast (2/32nds) about 9k miles later.

I thought they were a great looking tire, but after that experiment, I realized the nice price would be more expensive in the long run, so I disregarded ever considering a new set. I am curious how many miles someone should expect to get out of them.

Also, after looking at my truck last night, it appeared to me I could clear 37's on a tight turn with no trimming required.

 

[RedSRT4Me]

Aside of the look, you'd want the 12" wide with that tire. The 10" wheel won't be wide enough to wear evenly

 

[Heucobob]

I’m running 37x12.5 nitto ridge grapples . On a 20x12 rim .

 

[Heucobob]

Sorry 20x12-44 on 37x12.5

 

[kowbel11]

@Heucobob any trimming? And those are on 6” lift?

 

[kowbel11]

Aside of the look, you'd want the 12" wide with that tire. The 10" wheel won't be wide enough to wear evenly

Actually oddly enough a 12” isn’t with in the recomended rim widths.

 

[kowbel11]

@MarshRam I haven’t even looked at reviews but apparently I should. I guess they did make some changes to them not sure when though.

 

[2010 Infantry Vet]

Do you have a picture from the front? I would like to see how close to even you are with the flares. Really what I would like to do is run 37's that are even or slightly past the flares.

I can get you one tomorrow.

 

[MarshRam]

@MarshRam I haven’t even looked at reviews but apparently I should. I guess they did make some changes to them not sure when though.

If it helps any, I tried the Amps out about 4 years ago. Maybe they aren't so soft anymore!