6.4 intake manifold removal info from manual?

[RedRaiderHemi]

gotta do the egr hose replacement. The manual links here are for a 2012 with the 5.7. I inferred from some youtube videos there is a certain sequence the bolts should be loosened/ tightened. Anyone able to scan a few pages or point me in the direction for info?

 

[Wild one]

gotta do the egr hose replacement. The manual links here are for a 2012 with the 5.7. I inferred from some youtube videos there is a certain sequence the bolts should be loosened/ tightened. Anyone able to scan a few pages or point me in the direction for info?

Post #9 has the torque sequence,just reverse it.

Check your intake manifold bolts

This hasn't been talked about for awhile,but check your intake manifold bolts.They call for 108 in-lbs or roughly 9 ft-lbs of torque,and they should be checked at least yearly,as they do loosen up. I've been doing mine at least twice a year on all 3 of of my hemi equipped vehicles.They should be...

www.ramforum.com

 

[Filthy Filbert]

Arent the 5.7 and 6.4 identical in terms of dimensions, bolt patterns, etc? I would imagine the torque sequence and values are also the same

 

[Daw14]

Arent the 5.7 and 6.4 identical in terms of dimensions, bolt patterns, etc? I would imagine the torque sequence and values are also the same

Yes , a 6.4 truck intake makes a fine upgrade too.
Bolt pattern is they same ,however a few things up top change .

 

[RedRaiderHemi]

well, from what I have seen, 5.7 you have to remove the alternator, and the 6.4 you dont. But IDK, about to find out!

 

[RedRaiderHemi]

Post #9 has the torque sequence,just reverse it.

Check your intake manifold bolts

This hasn't been talked about for awhile,but check your intake manifold bolts.They call for 108 in-lbs or roughly 9 ft-lbs of torque,and they should be checked at least yearly,as they do loosen up. I've been doing mine at least twice a year on all 3 of of my hemi equipped vehicles.They should be...

www.ramforum.com

thank you!