6.4l cam swap problem

[crackerjack1957]

Can someone please do a parts list to do a 6.4 cam swap in a 5.7 with MSD delete. I have a failing cam and want to get the swap done ASAP. I already have headers, intake and tune.

I would go here http://www.modernmusclextreme.com/ & call MMX #
They will put a parts list together for you that will work.

 

[Wild one]

Can someone please do a parts list to do a 6.4 cam swap in a 5.7 with MSD delete. I have a failing cam and want to get the swap done ASAP. I already have headers, intake and tune.

I'm guessing you're looking at the 6 speed manual tranny SRT 6.4 Challenger cam if you are wanting a non-mds 6.4 cam.There's better cams then that one for a 5.7.Check out Matt/Moes / Jay Greene / TSP etc. for a cam suited to your application.The 6.4 cams don't really have a great reputation for living either.

 

[crackerjack1957]

I'm guessing you're looking at the 6 speed manual tranny SRT 6.4 Challenger cam if you are wanting a non-mds 6.4 cam.There's better cams then that one for a 5.7.Check out Matt/Moes / Jay Greene / TSP etc. for a cam suited to your application.The 6.4 cams don't really have a great reputation for living either.

Did you see this failure on this 6.4?
I was surprised the aftermarket failed also.
https://www.ramforum.com/posts/2209734/

 

[Tim Garceau]

That SRT cam is only good on the big end, low to midrange will suffer even with a higher stall

Don't waste your time

 

[burner71]

thats why i went with the 6.4 truck cam.

 

[Wild one]

Did you see this failure on this 6.4?
I was surprised the aftermarket failed also.
https://www.ramforum.com/posts/2209734/

I did.It's not unheard of for an aftermarket cam to fail,but it's not common enough to say an aftermarket cam is a bad choice.