8 pin switch...

[Justdoin_mybest84]

Nvision light bar and Nvision 2-light quick connect wire harness. I don’t like the switch that it comes with so I bought one from auto parts store and didn’t realize it is an 8 pin switch. The only instructions I found online are a diagram that is configured completely different, and a video in Hindi... the harness that connects to the switch is 3 wires. White, blue, black. Thank you

 

[dwhutch]

Nvision light bar and Nvision 2-light quick connect wire harness. I don’t like the switch that it comes with so I bought one from auto parts store and didn’t realize it is an 8 pin switch. The only instructions I found online are a diagram that is configured completely different, and a video in Hindi... the harness that connects to the switch is 3 wires. White, blue, black. Thank you

Does the switch have a light in it? If so it's likely a DPDT switch, two separate switches tied together.

Sent from my SM-G970U using Tapatalk

 

[Justdoin_mybest84]

Yes it has two lights actually. The off position led should turn on with the ignition and stay on till flipped is my understanding with this switch. I can’t find a lot of info about it. Would you happen to know where I piggy back? And where I bring power to the switch?

 

[dwhutch]

Do you know what the three wires from the light harness are for?

Sent from my SM-G970U using Tapatalk

 

[Justdoin_mybest84]

Do you know what the three wires from the light harness are for?

Sent from my SM-G970U using Tapatalk

just a quick thank you for replying. I was able to find a 5 pin and a 3 pin switch.