BigMike005
Senior Member
I saw today on my DSP, there is an option on throttle response.... what are you guy putting it on....how much do i increase?, if i should....
Advice from DSP users
- Thread starter BigMike005
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
good luck someone will know. 
bigtigga84
Senior Member
- Joined
- Dec 19, 2010
- Posts
- 3,459
- Reaction score
- 35
- Location
- dela....where?
- Ram Year
- 2006
- Engine
- Hemi 5.7
When I had mine I had it all the way up.
BigMike005
Senior Member
Really....and how did the truck do?
bigtigga84
Senior Member
- Joined
- Dec 19, 2010
- Posts
- 3,459
- Reaction score
- 35
- Location
- dela....where?
- Ram Year
- 2006
- Engine
- Hemi 5.7
Touchy but wasn't bad
BigMike005
Senior Member
What do you mean touchy
BlackedOutHemi
Senior Member
- Joined
- Feb 27, 2011
- Posts
- 5,454
- Reaction score
- 196
- Location
- DFW, Texas
- Ram Year
- 2012 & 2012
- Engine
- 5.7L HEMI & 6.7L Cummins
KGBIGCOUNTRY
Senior Member
- Joined
- Jun 29, 2010
- Posts
- 13,309
- Reaction score
- 475
- Location
- MECH, VA
- Ram Year
- 2004 RCSB/2005 QCSB
- Engine
- 5.7 / 5.7
Intrested to hear bout this also, the fly by wire is slow IMO.
truckin151
Supporting Member
I had mine set to 10 and it felt great, anything higher and it felt to touchy. If you have a ported TB DO NOT go above 10, it becomes way to sensitive.
If you are custom tuned, I believe the TB sensitivity is already increased so increasing it more might be an issue. I know right now with my tune, if I increase it another 1-2 settings it makes the truck act funky.
I would go to 10, see how you like it and then increase it by 1-2 from there til it feels off, then back it down 1.
If you are custom tuned, I believe the TB sensitivity is already increased so increasing it more might be an issue. I know right now with my tune, if I increase it another 1-2 settings it makes the truck act funky.
I would go to 10, see how you like it and then increase it by 1-2 from there til it feels off, then back it down 1.
BigMike005
Senior Member
when i went to modify it, it was set on 0....so i jus brought it up to 2...runs pretty nice.....
truckin151
Supporting Member
Right it will start on 0, 1 through around 6 I didnt feeel much of anything over the performance tune file, above 6 It started feeling better and best around 10 before it started acting up with my ported TB.
glass3222
Senior Member
When I ran mine, I tried everything. 20 was very touchy. I found 8 to be the best for me with my ported TB. It felt the closest to a cable driven throttle getting rid of most (but not all) of the drive by wire feel. When I removed the ported TB I bupmped it up to 12 to get the same feel.
