Azmp1
Senior Member
- Joined
- Mar 3, 2016
- Posts
- 111
- Reaction score
- 45
- Ram Year
- 2014
- Engine
- 5.7 HEMI
Hi Folks, so one of the upgrades im doing is replacing my ra2 radio with the aftermarket chinese unit. Im pretty much done and everything is pretty good, except the back up camera. I have the backup camera all install and harness ran, but the problem i'm getting is the camera doesnt work when truck is on, with engine running, but does not when the car is in the run position, without engine started. As i shift to reverse with the engine not running (key position RUN) the camera turns on with a nice clear picture. However, once i start the engine and shift to reverse, all i get is black screen. Any thoughts as to why this is happening, or anyone had this issue when installing the aftermarket camera, with aftermarket headunit? Many thanks!!