When installing any of these after market lights, does anyone know where the rocker switch gets plugged into in order to have the lights turn on automatically? I have a 13 and keep my light switch on auto. I'd like these lights to go on/off with all my other lights without playing with a toggle switch... Any help would be appreciated
Aftermarket light install question...
- Thread starter jgraz82
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
sbarron
Senior Member
- Joined
- Feb 28, 2015
- Posts
- 3,363
- Reaction score
- 2,282
- Location
- Wasilla, Alaska
- Ram Year
- 2013
- Engine
- 5.7 HEMI
tap into the headlight circuit somewhere, (i chose behind the drivers side headlight), and use that as a trigger for a relay that powers the actual lights.
You'll have to install the toggle switch inline with the trigger circuit so you'll need both the headlights on, and the toggle switch on for the aux lights to com eon.
I did mine that exact way. Build thread with wiring diagram: http://www.ramforum.com/f41/led_light_bar_pods_install_behind_grill_bumper-63186/
You'll have to install the toggle switch inline with the trigger circuit so you'll need both the headlights on, and the toggle switch on for the aux lights to com eon.
I did mine that exact way. Build thread with wiring diagram: http://www.ramforum.com/f41/led_light_bar_pods_install_behind_grill_bumper-63186/
Similar threads
