Air suspension Wires / position in wiring block

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rob Nicolodi

Junior Member
Joined
Feb 22, 2023
Posts
1
Reaction score
0
Location
Virginia
Ram Year
2020
Engine
5.7L
My 2020 Ram 1500 Laramie did not come with air suspension and I am not looking at adding it. What I do want to do is change out the controller for that has Traction control, tow/haul, and rear/front parking assist to include the Air ride switch as well. I want to then wire that switch to operate my train horn. I currently have the train horn wired to a button that is mounted to an aluminum plate that I taped up to make it less obvious. But to have it on that air ride switch will make it better looking and less conspicuous. I have no desire to connect the train horn to the factor horn. Any help identifying which wire / port in the wiring harness I need to connect to would be awesome. Thank you
 

Attachments

  • Ram Ribbon Cable.jpg
    Ram Ribbon Cable.jpg
    129.8 KB · Views: 11
  • Added switch.jpg
    Added switch.jpg
    96 KB · Views: 9
Top