Alignment with level question

[Racing Woody]

So my plan was to install my front bilsteins set at 2.8” tomorrow and the rear bilsteins with a 1.5” spacer from TGC as suggested by many in the above sticky thread, then have the truck aligned on Tuesday. Unfortunately TGC is out of tubing for the rear spacers and didn’t get realized until late in the week and I am looking at another week before I have the rear spacers.

My question is if I still do the fronts tomorrow and alignment on Tuesday, when the tears come in and get them installed will I need another alignment or is the front the only things that will get out of line? Also should I just go ahead and install the rear bils tomorrow or just wait until I have the spacers and do the rear all at once?

Thank you.


Sent from my iPhone using Tapatalk

 

[ilovemyramlaremie]

Alignment is only necessary for the front

 

[ThunderMug95]

^^Correct. No geometry changes in rear that would affect tire wear or tracking. Rear is just moved in the vertical plane

 

[Racing Woody]

Sweet. Thank you.


Sent from my iPhone using Tapatalk