Alphaobd issue

[WarlockMan]

So, here’s my issue. I changed basically every light to an LED in my Ram. Exterior and interior. I was messing around with alphaobd and now, when I open my doors the interior lights don’t come on. Only when the key is in the ignition does it work. I’ve read a few threads and seen some information about the door ajar settings. I’m looking for the original settings.

And no, I didn’t make a backup before I made these changes.

 

[indept]

Welcome to the forum. Can't tell you what setting it is but you should be able to find the answer in the AlphaOBD sticky below, do a search there:

AlfaOBD

Please Read!!! Supported years: 2013 to 2018 Make a backup of your original BCM configuration before making any changes. While we have a few BCM configs to compare with, there is nothing like comparing to your own pre-changes. Instructions: Uploading System ID (BCM) Information: Thank you...

www.ramforum.com

 

[WarlockMan]

Well, I fixed it. It wasn’t a matter of using Alphaobd. Turns out one of the LEDs in the interior was dying (on its way out). I replaced the upper glove box, dome, map and feet LEDs. Now it’s working as it should. I went with error free canbus LEDs and they seem to work fine.