CheechDogg.0n37s
Banned
- Joined
- Nov 20, 2018
- Posts
- 0
- Reaction score
- 65
- Location
- Riverside California
- Ram Year
- 2018 2wd
- Engine
- HEMI 5.7 Revolution 4.88s
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I get the Parking Light Out error and can't clear it with AlfaOBD. Its something with the voltage because I only get it when the headlights are on and I use a turn signal or high beams. It will come on, then clear, then on, then clear. Super annoying. AlpahRex was no help. When AlfaOBD LED settings didn't fix it, they told me to try disconnecting the built in resistors on the lights, but then I got hyperflash. I finally figured out that if I have my fog lights on, the code comes up instantly and does not clear until I shut the truck off. My father has a 2014 with projector headlights, LED turns and markers. I am going to get into his BCM with Alfa and see what his settings are and see where his truck is different.
The truck with projector headlights will have different settings in the BCM. My 15 with projectors runs HID lows, LED highs, and LED Fogs without any extra resistors, or relays.
I just set the settings in ALFA and forgot about it. I'm not 100 percent sure why everyone has so many problems but I haven't played with anyone else's truck
Does anyone know if AR was able to get their hands on a truck with the error code? I'm really curious to see if they can figure this out. Believe it or not, my error code has gotten worse. I wouldn't think it would matter, but since weather has cooled and my heated seats and steering wheel are coming on, the error code is more random than it was.
What resistors worked? I have the luxx series too with the bulb out warningI have the LUXX and they couldn't fix it for me either, I would have never bought them had I known all the hoops ahead of time or at least told me up front just put the resistors in.
The last time I spoke with them they wanted me to start removing other led items like my Alpharex tail lights to see if that fixed the headlights which we all know is not the solution.
I doubt just copying the projector light settings is going to work.
What did fix it for me is the aftermarket resistors and I have LED everything, fogs, tails, chmsl, etc...
I did leave all my settings with alfaOBD set to led and the door ajar disabled as that last one made all kinds of new errors when I started changing it.
For now all is good and I'm not changing anything!
I want to get the NOVAs but I still have not gotten a solution for the bulb out warning for my truck ...What resistors worked? I have the luxx series too with the bulb out warning