Alpine X208U with EXTRAS.....LOOK

[Dirty from upstate NY]

What I have here is a Alpine X208U with all the stuff needed to make it fit your RAM! Over 2k to do this and I'm offering it up for the next person who craves the adjustability, audiophile quality and expandability for their system. I custom made the radio and hvac bezel to work with this radio. Meshing a alpine retrofit kit with the oem hvac controls. The I data link programming and the wiring already complete. All you need to do is swap out some stuff, trim some metal, click some harnesses together and your all set to go! I didn't want to type a books worth of the details on install, so I'll leave that for PMs. If you haven't done a aftermarket radio install before.......this is not for you.

Looking for $800 or best offer, shipped within the continental US. PayPal Only, pickup available (Rochester, NY)


this is a KILLER price for what has already been modded and what you get! Don't kick yourself in the a** for passing this up!

 

[ilovemyramlaremie]

Wish I could fit it in a 2010 Laramie lol

 

[Booner21]

Will this fit a 2017 2500 uconnect 5.0 with 4 position fan? Crutchfield is telling me no?

Sent from my SM-G920V using Tapatalk

 

[michaelrc51]

If only this would fit my 09

 

[Dirty from upstate NY]

Will this fit a 2017 2500 uconnect 5.0 with 4 position fan? Crutchfield is telling me no?

Sent from my SM-G920V using Tapatalk

Not with my setup. The radio itself would work. The I data link would have to be set up to your configuration. But the rest of the stuff I got is not compatible to yours.

 

[Dirty from upstate NY]

Not with my setup. The radio itself would work. The I data link would have to be set up to your configuration. But the rest of the stuff I got is not compatible to yours.

Alpine does sell a complete radio bezel for the 3 knob setup. That’s what I had to cut in half to bind to my stock lower half. So I guess it would work, just need to find the bezel.

 

[Dirty from upstate NY]

Bump

 

[Dirty from upstate NY]

Bump for $800 or best offer!

 

[Dirty from upstate NY]

Bump

 

[aramos3]

I am assuming you previously had the factory uconnect 8.4 screen hence the HVAC layout. With the maestro unit does it have provisions for the HVAC air flow direction like floor, or upper since their are no hard buttons to select the option and it was previously controlled by the uconnect screen. Also does this set up play well with the factory back up camera?

 

[2010 Infantry Vet]

This radio will fit with a different bezel and some trimming. I have the similar X108U 8” radio in my 2010

 

[Dirty from upstate NY]

I am assuming you previously had the factory uconnect 8.4 screen hence the HVAC layout. With the maestro unit does it have provisions for the HVAC air flow direction like floor, or upper since their are no hard buttons to select the option and it was previously controlled by the uconnect screen. Also does this set up play well with the factory back up camera?

The hvac controls that were available to use with the factory 8.4 is there in the alpine! All adjustments, just like oem. The harness accommodates the factory rear view camera input.

 

[Dirty from upstate NY]

I am assuming you previously had the factory uconnect 8.4 screen hence the HVAC layout. With the maestro unit does it have provisions for the HVAC air flow direction like floor, or upper since their are no hard buttons to select the option and it was previously controlled by the uconnect screen. Also does this set up play well with the factory back up camera?

 

[Dirty from upstate NY]

just tap the logo between the seats on the screen and it cycles through all airflow options.

 

[2010 Infantry Vet]

just tap the logo between the seats on the screen and it cycles through all airflow options.

These alpine radios are amazing. So many more options than the factory 8.4

 

[markusaf81]

Is this still available?

If you would like to entertain a bunch of questions and its still available, shoot me a PM. I have installed quite a few radios in different vehicles in the past but had some questions on how this would work in my truck.

 

[Guyb]

Will this work with the factory microphones?

 

[Guyb]

Is this still available?

Sent from my SM-G965U1 using Tapatalk

 

[Mahoney82]

Is this sold yet?