Another No Crank No start

[BackroadsBadace]

Hey yall, first time posting so bear with me.
I have a 2013 2500 with the 6.7. I just bought a 2018 and the 2013 has been sitting for about 4 days. Went to go start it and have power, no crank, no start. Through ABS Codes: C2206 & C0078. Airbag Codes: U1415 and BCM Codes U0100. I do have AlfaOBD. I threw a battery charger on just incase it was low voltage causing the issue. I’m thinking my abs module decided to call it quits but I was wondering if anyone had any tips on where to start. I’ve looked through a couple of the forums and haven’t noticed anyone with quite exactly the same issues but figured I’d ask before I pull the abs module and send it to get rebuilt. Thanks

 

[04fxdwgi]

My bet is still battery or connections

 

[BackroadsBadace]

My bet is still battery or connections

No dice. I robbed the ones out of my 2018 and put those in and still have same symptoms. All the visible connections I can see look fine

 

[jjtotten]

my battery is good new run start switch still no run no start

 

[MarshRam]

What's going on here is the 2013 is very disappointed you ditched her for a 2018, traded an older woman in for a newer one... All jokes aside, I recall a 3rd gen I used to have had a couple issues and when it did, it threw numerous codes, but there was really only one issue. I'm sure your airbags didn't just go out. Check your starter connections is all I got since you cleared the battery. Even if connections are good, starter or solenoid could be the issue. Could be the PCM, could be the...... If you can't get anywhere and I were in your shoes, I'd have a skilled mechanic take a look. Would hate to see you spend money on an abs and it doesn't resolve the problem. One comment I have seen posted thousands of times; "don't throw parts at it" and it's extremely sound advice. Hopefully someone here has a good lead for you. Good luck!