Anzo 111270 upgrade to GTR2 LED

[horse51]

Recently purchased Anzo 111270 Projectors and LED to upgrade headlights. Also did Morimotto fogs

For the Anzo Headlights, is the only way to chane out blubs is cut the rubber membrane on back or am I missing it

Also picked up resistors etc for them ...Any thoughts on mounting them are appreciated...Ds tape or put some screws in them

2016 Ram Hemi 1500

 

[JoeCo]

Recently purchased Anzo 111270 Projectors and LED to upgrade headlights. Also did Morimotto fogs

For the Anzo Headlights, is the only way to chane out blubs is cut the rubber membrane on back or am I missing it

Also picked up resistors etc for them ...Any thoughts on mounting them are appreciated...Ds tape or put some screws in them

2016 Ram Hemi 1500

I'm not sure as I've never dealt with those headlights before, but if you don't get any answers here you'll probably have better luck posting over in the 4th gen section. This section is for the 5th gens (2019 and up).

 

[horse51]

Excellent and thankyou !!

 

[stimpy433]

Can you post a picture of it??? I would think that they are rubber dust caps that should just pop off.....

 

[horse51]

they should be here today and maybe it is but looks odd w 2 wires

 

[stimpy433]

I would say that has to be a dust cap that's removable or otherwise how would you ever change the headlight bulb???

 

[horse51]

I stand corrected... mine just got delivered and thats what it is ... Now just need to see if led fit in there and how they breathe