Arh headers

[jknappen]

Lookin into the long tubes with cats. Question is will my factory o2 sensors screw right in? Will i throw any codes with this upgrade and lastly do they bolt right up to the factory pipe going into the muffler... I have a gibson catback exhaust currently

 

[Rossp]

I'm not familiar with ARH headers on our trucks but they're stuff is high quality. Your o2s should bolt right back in place, and no engine light should come on if the comverters stay in place.

 

[Mr.Smith]

Mine bolted right in. They even include extentions incase you need them for wiring. I didn't get any codes on mine for the few days I had them before my tuner turned them off for me

 

[jknappen]

Im not going to be running a tuner for a bit... Although i may wait to install them after a tuner is bought

 

[theviking]

On my 2500 hey bolted up to a Magnaflow catback without issues. O2's transferred over as well. Occasionally will get a code but either just clear it out with a scanner while patiently waited for Diablosport to release 2015 Ram HD programming.

 

[Hemi450hp]

Like the guys said, the ARH headers are a direct bolt on header system. They come with gaskets, bolts, 4 or sensor extensions, and clamps to tie the new y-pipe into your current exhaust. Everything bolts into place easily. You will likely trigger an occasional check engine light due to the high flow cats and stock tuning, but Hemifever can tune that out for you once you add a custom tune.