ARH LTH questions

[Ramitiner]

Honestly in my opinion it gained a bunch of torque on the bottem end compared to the stock log manifolds.I wouldn't worry to much about either size headers,they'll both blow the stock manifolds into the weeds as far as grunt goes. Way back when my truck was a little closer to stock,i was running a Diablo 93 canned tune and the stock manifolds,the truck was running low 14's with a best of a 14.19,threw the big JBA's /catless midpipe on it and had a custom datalog tune done,the truck went from low 14's to mid 13's with a best of a 13.4,admittedly the tune did help,but the headers were also a lot of the gain.That was with the stock cam and just a CAI and Magnaflow catback behind the catless mid pipe.

beautiful. thank you

 

[Ramitiner]

FYI Nick at Gotexhaust.com has some good sales on the ARH systems...just a day or 2 left

 

[Wild one]

FYI Nick at Gotexhaust.com has some good sales on the ARH systems...just a day or 2 left

Did you price out a set of Stainless Works headers through him. I think they're a better set of headers then the ARH's are,they're supposedly an equal length primary tube.If Jason Duria swapped his ARH's for SW,and swears by the SW's,there's got to be something to the SW headers,Jason's not known for wasting money,lol

 

[Ramitiner]

they seemed more expensive and the ARHs were on sale but still not cheap, lol. im sure ill be happy with the ARHs

 

[Pull Ya]

If you coat them, they will cancel the warranty.
Jay

 

[Ramitiner]

If you coat them, they will cancel the warranty.
Jay

Wow! Should I wrap then?

 

[Pull Ya]

I coated mine anyway--I'd only wrap the tubes if they were in contact with something that would melt. There is some prep work that you should do before you install them to insure you don't cook anything like wires etc. PM me and I'll let you know what I have learned and what I did.
Jay

 

[Ramitiner]

I coated mine anyway--I'd only wrap the tubes if they were in contact with something that would melt. There is some prep work that you should do before you install them to insure you don't cook anything like wires etc. PM me and I'll let you know what I have learned and what I did.
Jay

Will do