jabartram
Senior Member
- Joined
- Mar 16, 2015
- Posts
- 334
- Reaction score
- 173
- Location
- Corpus Christi, Texas
- Ram Year
- 2020 Power Wagon
- Engine
- 6.4 Hemi
OK, 2013 1500 Lonestar.
I finally found a switch panel from a wrecked 2013 that works, well the 3 top buttons work, i added the 5 lower aux buttons from another switch panel and soldered in the terminals (in the proper places in the circuit board) plugged the modified switch bank into my truck, the 3 top buttons work as they should, but the 5 aux buttons do not function.
Using alphaobd (my 2013 powernet) i cannot find a setting to enable the aux buttons can anyone point me to the correct setting in my 2013 powernet for the auxiliary buttons enable?
I finally found a switch panel from a wrecked 2013 that works, well the 3 top buttons work, i added the 5 lower aux buttons from another switch panel and soldered in the terminals (in the proper places in the circuit board) plugged the modified switch bank into my truck, the 3 top buttons work as they should, but the 5 aux buttons do not function.
Using alphaobd (my 2013 powernet) i cannot find a setting to enable the aux buttons can anyone point me to the correct setting in my 2013 powernet for the auxiliary buttons enable?