Big-Blue15
Member
Hey ya'll!! I'm fixin to install a CB in to my truck. I'm looking to see some of your setups. Please include descriptions. TIA
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I see all these pictures of people with complex setups so I think mine is pretty boring.
I have a Cobra 75 WX ST I have it sitting under the passenger seat unsecured with the mic hanging from the passenger side cubby in the center stack. I am essentially running power directly from the battery.
The antenna is mounted on a 2" x 7" piece of sheet metal that I cut with a jig saw and bend by hand with a too small bench vise. The antenna is a 3' Firestik II it worked decently a couple weekends ago off roading. I am using the Firestik K4-8R18 mount and coax run through a hole I drilled in the clutch delete plate.
All the cabling surrounding the installation is run through the clutch delete plate. I can take some pictures and post them here when I get home.