crash detection failure/cruise c

[dpfreeman13]

OK, hello people. I recently bought a 2020 power wagon. It has a 2 inch Carli backcountry lift with 37's. It had a cracked windshield. Every thing worked before I got the windshield replaced. After the windshield got replaced with an OEM windshield the place couldn't calibrate it, and they gave it back to me with the crash detection and cruise control warning lights on. They stated it was due to the lift that they couldn't calibrate it and I needed to take it the dealership. So I did. They have had it for a week. They state that they tried to calibrate it and it will only hold the calibration for a little while then resorts back to the warning lights coming back on. They took the camera apart and said it is working. They contacted the engineers at Ram and they gave them the low down along with all the data from the computer in the truck. They are now saying that Ram is suggesting to remove the lift and set the truck back to stock height and try recalibrating then. At my dime of course.
Has anybody had this issue or have any ideas.

Thanks.

 

[RamDiver]

Welcome to Ram Forum.

I would suggest that you search the forum using the search utility in the upper right corner or your favourite search engine with a term like 'windshield replacement calibration'. Just add ramforum.com after the search item with a search engine.

IIRC, many users have learned that the OEM windshield installed wasn't a true OEM part, and that was the root of the calibration issue.

.