BlackRamHemi
Senior Member
- Joined
- Aug 14, 2013
- Posts
- 1,266
- Reaction score
- 557
- Location
- Edmonton Alberta Canada
- Ram Year
- 2010
- Engine
- Hemi 5.7L
BlackOut RetroShop 13+ Projectors
Prefer local (Edmonton Alberta) sale due to shipping co$t
I know there's a TON of Alberta Rams that would look Killer with these!!!
These are the real deal OEM Lamps, not TYC replicas.
Lamps were opened by the Pro Jeremy at the RetroShop,
Chrome Shrouds were painted Gloss Black
LED lens and side Reflector tinted Candy Black, and re-sealed.
Morimoto HID 35w/5000k bulbs already installed.
THESE WILL WORK in ANY 09'-14' RAM (1500/2500/3500) without modification.
Deal comes with:
Two NEW RetroShop plug&play adapters
to work on any 4G Ram that came originally with Quads/Duals.*
Two NEW Morimoto Canbus adapters that eliminate wire harness/relays
Two NEW 3Five (35w) Morimoto Ballasts
*Adapter is 09'-12' RAM ready (Single Resistor)
IF YOU HAVE A 13+ RAM that came with quads/duals...
You will require an additional resistor in the adapter for the parking lamp circuit
Jeremy will Provide them, No problem.
With those mods/parts and shipping to Canada today would cost $1500US
...plus another $70 at the post office for local taxes/border fee.
Drivers Side lamp has small area inside lower corner of shroud where paint blistered, but has not spread any further.
It's about 1/2" the size of a finger nail and hard to even get it to show up in a photo. Would probably have to show you in person.
Jeremy thought it may have been from the sun that hit it at just the right angle like a magnifying glass.
It's a minor blemish on an otherwise Fantastic set of lights/HID's.
Tons of pictures in my build thread here:
http://www.ramforum.com/f96/blackout_edition_13_projector_upgrade-55597/
asking $1200Can (around~$1100US) , that you can even pay directly to Jeremy at the RetroShop via paypal or CC
He will let me know when payment has cleared and I will hand them over.
Reason for selling:
I had a second set made up with FX-R projector retro fit and Demon Eyes
If these don't sell here to a fellow RamForum member
I'll post them up to Kijiji, if they still don't move I'll consider shipping South.
Prefer local (Edmonton Alberta) sale due to shipping co$t
I know there's a TON of Alberta Rams that would look Killer with these!!!
These are the real deal OEM Lamps, not TYC replicas.
Lamps were opened by the Pro Jeremy at the RetroShop,
Chrome Shrouds were painted Gloss Black
LED lens and side Reflector tinted Candy Black, and re-sealed.
Morimoto HID 35w/5000k bulbs already installed.
THESE WILL WORK in ANY 09'-14' RAM (1500/2500/3500) without modification.
Deal comes with:
Two NEW RetroShop plug&play adapters
to work on any 4G Ram that came originally with Quads/Duals.*
Two NEW Morimoto Canbus adapters that eliminate wire harness/relays
Two NEW 3Five (35w) Morimoto Ballasts
*Adapter is 09'-12' RAM ready (Single Resistor)
IF YOU HAVE A 13+ RAM that came with quads/duals...
You will require an additional resistor in the adapter for the parking lamp circuit
Jeremy will Provide them, No problem.
With those mods/parts and shipping to Canada today would cost $1500US
...plus another $70 at the post office for local taxes/border fee.
Drivers Side lamp has small area inside lower corner of shroud where paint blistered, but has not spread any further.
It's about 1/2" the size of a finger nail and hard to even get it to show up in a photo. Would probably have to show you in person.
Jeremy thought it may have been from the sun that hit it at just the right angle like a magnifying glass.
It's a minor blemish on an otherwise Fantastic set of lights/HID's.
Tons of pictures in my build thread here:
http://www.ramforum.com/f96/blackout_edition_13_projector_upgrade-55597/
asking $1200Can (around~$1100US) , that you can even pay directly to Jeremy at the RetroShop via paypal or CC
He will let me know when payment has cleared and I will hand them over.
Reason for selling:
I had a second set made up with FX-R projector retro fit and Demon Eyes
If these don't sell here to a fellow RamForum member
I'll post them up to Kijiji, if they still don't move I'll consider shipping South.
Last edited:
