Fishstickz
Senior Member
- Joined
- Jul 20, 2017
- Posts
- 643
- Reaction score
- 362
- Location
- Oklahoma
- Ram Year
- '06, '16
- Engine
- 3.7, 5.7 Hemi
I'm kinda interested in buying a custom gauge face in the near future (When my wallet is equally interested) so I'm wondering if anyone on here has done it themselves. I'm also wanting to figure out how hard it is to remove and replace, because the only write-ups I've found are about replacing the lights behind the gauges, not disassembling the cluster altogether.
Also I'm wondering if I could get completely white needles at night if I use blue LEDs for backlight, as I would like to have a white needle, and darkish blue numbers/hashes. Or if I would have to use white LEDs to get the white needles, and just try to get a darker blue tint on the numbers.
And as always thanks for any pics/advice
Also I'm wondering if I could get completely white needles at night if I use blue LEDs for backlight, as I would like to have a white needle, and darkish blue numbers/hashes. Or if I would have to use white LEDs to get the white needles, and just try to get a darker blue tint on the numbers.
And as always thanks for any pics/advice
