Litew8
Senior Member
- Joined
- Feb 21, 2014
- Posts
- 279
- Reaction score
- 67
- Location
- Near Youngstown Ohio
- Ram Year
- 2009
- Engine
- 4.7l
Ok. So been wanting to do this for awhile and now i have all the parts i wanted so i started the processed. Baking the headlights is not too bad at all. First remove move all covers and wires . set oven at 275 and bake for 10 to 12 mins. Lay down a towel and have acouple flat heads or prytool ready. Pull them out and start prying first working the glue loose from edges. If u have to place headlight back into oven for 4 mins to get glue back up to temps. I found out that starting in the center of the top or bottom was better then the edges like everyone says. Work ur way all around until. U can pull it off . anyone have any tips or u have questions ask. Im just going off info i found on net.
Sent from my LGLS775 using Tapatalk
Sent from my LGLS775 using Tapatalk