DIY Bedliner finished *photos*

[sullivan]

Cost: Under $130.00

Time: Depends on your bed, mine had lots of dings and body work. I wanted a perfect and seamless bed, I spent 10 hours alone on sanding and prepping.

Difficulty: Its not that hard, but take your time. Dont try and get it done all in one day. I took two days and my time.

Supplies:
$109.00 - Raptor Kit (FREE SHIPPING)
$6.00 - Self Etching Primer (AutoZone)
$8.00 - Bondo Body Filler (Autozone)
$6.00 - 60&80 Grit

Now if you have the stock black liner in your bed, and you haven't done much in your bed, then you don't have a lot of work. Just sand it all down and spray the liner.

 

[BMRbrnSNRbrd]

Thanks for the info.

My truck is still new, so there's no damage to fix and I do have the factory drop in.

Did you already have a good compressor and the proper gun?

 

[durango4819]

that turned out amazing

 

[sullivan]

Thanks for the info.

My truck is still new, so there's no damage to fix and I do have the factory drop in.

Did you already have a good compressor and the proper gun?

I have a 30gallon compressor, any size would work as long as its not too little. I sprayed it on at 40PSI

The gun comes in the kit, ideally its just a simple spray gun nothing fancy.

 

[Hemiguy0302]

Well done. You took your time and it shows. Nice crisp tape lines and ****. You should start a company lol.

 

[schroederMP]

Old thread...but how is this holden up? I'm looking to ket a kit that I can re do my rockers/flares/ and bed with.

The spray gun, it any good? Something you can use more than once? Easy to clean?


Thanks for the info

 

[WhiteExpress]

Those Raptor liners work awesome. My friend bedlined his custom flat bed with it. It's holding up great and looks even better!

Looks professionally done! Good job buddy!

 

[SMITHY]

Looks good!

 

[HKkid]

Old thread...but how is this holden up? I'm looking to ket a kit that I can re do my rockers/flares/ and bed with.

The spray gun, it any good? Something you can use more than once? Easy to clean?


Thanks for the info

I'm interested as well.

 

[KGBIGCOUNTRY]

Also wanna know how its holding up, wifes needs a spray in